The following are forms for right-of-way and outdoor advertising permits. To submit a permit application, please use the Electronic Permit System (EPS). For further assistance, contact the INDOT Permits Division at firstname.lastname@example.org.
The permit bond, required for most types of right-of-way permits, is a performance bond which is processed by a qualified surety company. It ensures that the work will be completed in accordance with INDOT standards and specifications for the associated project(s). The bond must be in an amount sufficient to cover all work within the right-of-way.
The bond form must be notarized and submitted (1) electronically to EPS as a scanned PDF attachment, and (2) submitted in hard copy, with original signatures and notarization, to the appropriate INDOT office. Bond forms that are not fully completed, with all signatures, signers identified, and properly notarized with seal, will not be accepted.
|Type of Bond|
(Click on the title to download the form)
|Performance Bond||Blanket Bond|
|Coverage||Single Permit||Multiple permits (blanket bonds are used by companies that typically submit more than five permits)|
|Which Permits office handles|
For District contact information including mailing address, see the INDOT District Map page.
Mail original documents to:
Bond Release Information Request Form
Bond/Permit Fee Waiver (State Form 35483, R4/8-04)
This document can only be used by governmental agencies, schools, and churches when INDOT determines that fees and/or bonds can be waived. If the applicant hires a contractor, bonds are not typically waived unless the applicant shows proof that the department is named as a beneficiary in the bond between the applicant and the contractor and that the applicant will not release said bond until the department approves all work performed in the right-of-way.
Agreement To Execute An Access Control Document
In consideration for INDOT granting a driveway permit, the applicant may be required to sign an agreement to execute an access control document conveying the access rights for the balance of property frontage owned by the applicant. The agreement will allow INDOT to issue a permit to begin driveway construction before the actual deed relinquishing the remaining access rights is prepared and recorded on the property. This document is required for most developments with more than 400 feet of frontage along a State controlled highway.
Additional Disclosure Form (State Form 23237, R/3-00)
When additional parties are involved with a permit project, this form is used to acknowledge their involvement. One copy of the Additional Disclosure form is to be notarized and submitted with original signatures.
Used when a design consultant submits a permit application over EPS for a property owner, giving the consultant the right to act on behalf of the property owner.
Traffic Impact Study Checklist
Use this Template to facilitate Traffic Impact Study items in the Initial Meeting.
Boring and Jacking Specifications Worksheets
Used when submitting a permit application to INDOT for the purpose of boring and jacking a pipe under a state-controlled or interstate highway.
Outdoor Advertising Affidavit Templates
|Type of Affidavit||Template File||Instructions||Example|
|Zoning affidavit by zoning official||Template||Instructions||Example|
|Zoning affidavit by sign owner (if unable to obtain zoning affidavit by zoning official)||Template||Instructions||Example|
|Property owner consent affidavit||Template||Instructions||Example|
|Sign owner affidavit of consent (if sign owner is unable to obtain a property owner consent affidavit)||Template||Instructions||Example|
|Affidavit of sign transfer of ownership||Template||Instructions||Example|