Language Translation
  Close Menu
INDOT: English Sections 100-300 - Effective 09/01/2009

Indiana Department of Transportation

INDOT >  Doing Business with INDOT >  Standards & Specifications >  Standard Drawings >  Sept 2009 >  English Sections 100-300 English Sections 100-300

Standard
Drawings
English
Metric
Sections
100 - 300
Sections
400, 500
Section
600
Section
700
Section
800
Revised & New Drawings
Effective 09/01/09

Effective for Lettings on or after September 1, 2009
 
Section 100 - General Provisions
Section 200 - Earthwork
Section 300 - Bases

Last Updated: 5/8/13

Ref.
Title Description
Date
E 105-RCBL-01Road & Bridge Contract Limits Method for Determining Quantities within Structure Limits
9/1/00
E 205-TECD-01Temporary Check Dam, Revetment Rip RapElevation, Plan, Section
9/1/09
E 205-TECD-02Temporary Check Dam, Straw BalesElevations & Plan Views
9/4/07
E 205-TECD-04Temporary Sediment TrapElevation & Section Views
3/1/04
E 205-TECI-01Temporary Ditch Inlet Protection, Aggregate RingPlans & Elevation Views
3/1/02
E 205-TECI-02Temporary Ditch Inlet Protection, Geotextile BoxPlans, Sections, Trench-Box Details
3/1/02
E 205-TECI-03Temporary Ditch Inlet Protection, Slotted BarrelPlan & Elevation Views
3/1/02
E 205-TECP-02 Temporary Silt FencePlacement Near R/W Line; Near Channel
3/1/02
E 205-TECS-01Temporary Interceptor DitchIsometrics at Cut, Fill Sections
3/1/02
E 205-TECS-02Temporary Slope DrainPlan & Elevation Views
9/1/09
E 205-TECS-03Temporary Slope DrainIsometric View
9/4/01
E 211-BFIL-01Part Plan for Flared WingsPlan & Section Views
3/3/03
E 211-BFIL-02 Flared Wings Typical Cross Section Section View
9/30/94
E 211-BFIL-03Backfill Placement at Interior SupportAt Railroad or Highway; At Waterway
9/2/03
E 211-BFIL-04Backfill Placement at End Bent, Beam StructurePlan, Elevation, Sections
9/2/03
E 211-BFIL-05 Backfill Placement at End Bent, Slab Structure Plan & Section Views
9/1/04
E 303-STRW-01Shoulder Treatment for Resurfacing WorkShoulder Break Within or Outside Shoulder
9/4/07
E 306-TMPT-01 HMA Pavement Wedging & Transition Milling Elevation View
9/4/07

INDOT Events

More News & Events

Top FAQs