INDIANA TEST METHODS OR PROCEDURES INDEX |
Last updated: 02/18/08
|
INDIANA TEST METHODS OR PROCEDURES INDEX |
|||
| ITM No. | Effective Date | Contact Person | Title |
| Policy | 01/01/08 | R. Walker | INDIANA TEST METHOD OR PROCEDURE COMMITTEE |
| ITM 202 | 01/01/08 | T. Tracy | ACID INSOLUBLE CONTENT OF FINE AGGREGATE |
| ITM 203 | 01/01/08 | R. Rees | CONTROL PROCEDURES FOR CLASSIFICATION OF AGGREGATES |
| ITM 205 | 01/01/08 | R. Rees | ACCEPTANCE PROCEDURES FOR DOLOMITE AGGREGATES |
| ITM 206 | 01/01/08 | R. Rees | SCRATCH HARDNESS OF COARSE AGGREGATE PARTICLES |
| ITM 207 | 01/01/08 | R. Rees | SAMPLING STOCKPILED AGGREGATES |
| ITM 208 | 01/01/08 | M. Zaheer | PERMEABILITY OF AGGREGATES |
| ITM 209 | 01/01/08 | R. Rees | SOUNDNESS OF AGGREGATES BY FREEZING AND THAWING IN A BRINE SOLUTION |
| ITM 210 | 01/01/08 | R. Rees | CLASS AP COARSE AGGREGATE |
| ITM 211 | 09/01/06 | R. Rees | CERTIFIED AGGREGATE PRODUCER PROGRAM |
| ITM 212 | 01/01/08 | T. Tracy | ACCEPTANCE PROCEDURE OF AIR COOLED BLAST FURNACE SLAG FOR LEACHATED DETERIMINATION |
| ITM 214 | 01/01/08 | R. Rees | ACCEPTANCE PROCEDURES FOR POLISH RESISTANT AGGREGATES |
| ITM 215 | 01/01/08 | N. Siddiki | RECYCLED FOUNDRY SAND TOXICITY TEST |
| ITM 216 | 01/01/08 | A. Zander | LIGHTWEIGHT DYNAMIC CONE PENETROMETER TESTING OF FLOWABLE BACKFILL |
| ITM 217 | 01/01/08 | A. Zander | DRY FLOW TESTING OF FLOWABLE BACKFILL |
| ITM 218 | 01/01/08 | A. Zander | DRY UNIT WEIGHT FOR FLOWABLE BACKFILL |
| ITM 301 | 01/01/08 | K. Anderson | REINFORCING BAR AND DOWEL BAR CERTIFICATION PROGRAM |
| ITM 401 | 01/01/08 | A. Zander | HIGH PRESSURE AIR CONTENT OF HARDENED PORTLAND CEMENT CONCRETE |
| ITM 402 | 01/01/08 | A. Zander | STRENGTH OF PORTLAND CEMENT CONCRETE PAVEMENT (PCCP) USING THE MATURITY METHOD |
| ITM 403 | 01/01/08 | A. Zander | WATER-CEMENTITIOUS RATIO |
| ITM 404 | 01/01/08 | A. Zander | PCCP CORE LENGTH DETERMINATION |
| ITM 405 | 01/01/08 | A. Zander | PORTLAND CEMENT CONCRETE PLANT INSPECTION |
| ITM 505 | 03/01/96 | M. Zaheer | FIVE-CYCLE SLAKE RESISTANCE TEST ON SHALE |
| ITM 506 | 01/01/08 | R. Walker | FIELD DETERMINATION OF MOISTURE CONTENT OF SOIL |
| ITM 571 | 07/07/04 | M. Prather | QUANTATIVE EXTRACTION OF ASPHALT/BINDER AND GRADATION OF EXTRACTED AGGREGATE FROM HMA MIXTURES |
| ITM 572 | 01/01/08 | M. Prather | DRYING HMA MIXTURES |
| ITM 576 | 01/01/08 | H. Phillips | LABORATORY EVALUATION OF ANTI-ADHESIVE AGENTS |
| ITM 579 | 01/01/08 | M. Prather | QUANTITY DETERMINATION OF ASPHALT MATERIALS AND AGGREGATES FOR SEAL COATS |
| ITM 580 | 01/01/08 | M. Prather | SAMPLING HMA |
| ITM 581 | 01/01/08 | M. Prather | PERFORMANCE GRADED BINDER APPROVED SUPPLIER CERTIFICATION PROGRAM |
| ITM 583 | 01/01/08 | M. Prather | CERTIFIED HOT MIX ASPHALT PRODUCER PROGRAM |
| ITM 584 | 01/01/08 | M. Prather | BULK SPECIFIC GRAVITY OF AGGREGATE BLENDS WITH RAP |
| ITM 586 | 01/01/08 | M. Prather | ASPHALT CONTENT BY IGNITION |
| ITM 587 | 01/01/08 | M. Prather | REDUCING HMA SAMPLES TO TESTING SIZE |
| ITM 588 | 04/04/08 | M. Prather | PERCENT WITHIN LIMITS (PWL) |
| ITM 602 | 01/01/08 | T. Tracy | MERCAPTANS (WATER INSOLUBLE) BY IODIMETRIC TITRATION - DEADSTOP |
| ITM 604 | 01/01/08 | T. Tracy | FLEXIBILITY OF EPOXY PENETRATING SEALERS |
| ITM 605 | 01/01/08 | T. Tracy | MOISTURE PERMEABILITY OF EPOXY SEALER FILMS |
| ITM 606 | 01/01/08 | T. Tracy | APPROVAL PROCEDURES FOR COATING FORMULATIONS AND COATING SYSTEMS |
| ITM 801 | 01/01/08 | M. Prather | DETERMINING ASPHALT CONTENT OF PREFORMED EXPANSION JOINT FILLERS FOR CONCRETE PAVING AND STRUCTURAL CONSTRUCTION |
| ITM 802 | 01/01/08 | R. Walker | RANDOM SAMPLING |
| ITM 803 | 01/01/08 | R. Walker | CONTRACTOR QUALITY CONTROL PLANS |
| ITM 804 | 01/01/08 | R. Walker | SAMPLE MATERIAL CERTIFICATION FORMS |
| ITM 806 | 01/01/08 | R. Walker | APPROVED LIST REQUIREMENTS |
| ITM 807 | 01/01/08 | A. Zander | LABORATORY TESTING OF CHEMICAL ANCHOR SYSTEMS |
| ITM 808 | 01/01/08 | A. Zander | LABORATORY TESTING OF PCC SEALER/HEALERS |
| ITM 810 | 01/01/08 | R. Rees | SAMPLING DEICING MATERIAL |
| ITM 811 | 01/01/08 | T. Tracy | SAMPLING BULK CONTAINERS OF GLASS BEADS |
| ITM 812 | 01/01/08 | M. Prather | MACROTEXTURE OF MILLED PAVEMENT |
| ITM 813 | 01/01/08 | A. Zander | CERTIFIED PRECAST CONCRETE PRODUCER PROGRAM |
| ITM 902 | 01/01/08 | M. Doherty | VERIFYING SIEVES |
| ITM 903 | 01/01/08 | M. Doherty | VERIFYING OVENS |
| ITM 905 | 01/01/08 | M. Doherty | VERIFYING VACUUM SYSTEMS |
| ITM 906 | 01/01/08 | M. Doherty | VERIFYING MECHANICAL SHAKERS |
| ITM 908 | 01/01/08 | M. Doherty | VERIFYING CALIBRATION SETTINGS FOR SUPERPAVE GYRATORY COMPACTORS |
| ITM 909 | 01/01/08 | M. Doherty | VERIFYING THERMOMETERS |
| ITM 910 | 01/01/08 | M. Doherty | VERIFYING BALANCES |
| ITM 911 | 01/01/08 | A. Zander | VERIFYING SLUMP CONES |
| ITM 912 | 01/01/08 | K. Anderson | PROFILOGRAPHS |
| ITM 913 | 01/01/08 | M. Prather | VERIFYING SUPERPAVE GYRATORY MOLDS, TOP PLATES AND BASE PLATES |
| ITM 927 | 01/01/08 | T. Nahrwold | PROCEDURE FOR ROADWAY FIELD EVALUATION AND APPROVAL LIST REQUIREMENTS FOR TEMPORARY PAVEMENT MARKING TAPE, TYPE I |
| ITM 930 | 09/01/04 | T. Nahrwold | PROCEDURE FOR OUTDOOR WEATHERING EVALUATION AND APPROVAL LIST REQUIREMENTS FOR REFLECTIVE SHEETING MATERIALS |
| ITM 931 | 04/11/07 | T. Tracy | MEASUREMENT OF RETROREFLECTIVE PAVEMENT MARKING MATERIALS |
| ITM 932 | 01/01/08 | P. Goodwin | PROCEDURE FOR BENCH TESTING, FIELD TESTING, AND APPROVAL LIST REQUIREMENTS FOR TRAFFIC CONTROLLER CABINET COMPONENTS |
| ITM 933 | 01/01/08 | P. Goodwin | PROCEDURE FOR BENCH TESTING, FIELD TESTING, AND APPROVAL LIST REQUIREMENTS FOR 12 IN. LIGHT EMITTING DIODE (LED) TRAFFIC SIGNAL MODULES |
| ITM 934 | 01/01/08 | P. Goodwin | PROCEDURE FOR EVALUATING VEHICLE DETECTION PERFORMANCE |
| ITM 935 | 01/01/08 | P. Goodwin | PROCEDURE FOR BENCH TESTING, FIELD TESTING, AND APPROVAL LIST REQUIREMENTS FOR EXTERNAL TIME CLOCKS |
| ITM 936 | 01/01/08 | P. Goodwin | PROCEDURE FOR BENCH TESTING, FIELD TESTING, AND APPROVAL LIST REQUIREMENTS FOR VIDEO VEHICLE DETECTORS |
| ITM 945 | 01/01/08 | T. Nahrwold | PROCEDURE FOR ROADWAY FIELD EVALUATION AND APPROVAL LIST REQUIREMENTS FOR DURABLE PREFORMED PAVEMENT MARKING TAPE |
| ITM 947 | 01/01/08 | P. Goodwin | PROCEDURE FOR BENCH TESTING, FIELD EVALUATION, AND APPROVAL LIST REQUIREMENTS FOR SPREAD SPECTRUM RADIO MODEMS |
