There are many different ways to properly handle various types of waste, and there are separate industries that handle specific aspects of each one.
Recycling, Reuse, and Salvage
Many wastes often have parts that are still valuable and can be used again or processed into a new resource: Auto Salvage, E-waste, Mobile Home Salvage, Compost, or Land Application of Biosolids and Septage. Auto, electronic waste, and mobile home salvage include recovering parts for reuse. Grass, tree branches and other organic materials are composted in windrows to make a product. Biosolids and septage are land applied for nutrient values and soil amendments.
Some types of waste can be used as a source of energy: Incinerator, Biomass Digester and Gasification, or Alternate Fuel. In these facilities, waste is burned or processed for their fuel heat values or to produce steam or synthetic gas that can be used as energy.
If a waste is stripped of all its reasonable worth, then anything left over must be disposed. This is accomplished through burial in landfills. Even the best recyclers will have impurities and/or contaminants that cannot be processed and need to be disposed. And although incinerators burn their waste, there is still ash remaining that is no longer valuable as a fuel, so it is buried in landfills.
Transport, Transfer, and Collection Container Systems
Waste must be picked up and moved along the processing path. Waste tires are collected and transported to processing facilities. Septage may be transported and discharged directly into a National Pollutant Discharge Elimination System (NPDES), permitted Publicly Owned Treatment Works (POTW), or a storage/treatment facility. Municipalities or local governments may use a Collection Container System such as a county-wide collection box system to collect small quantities of municipal solid waste from the general public before transporting to a transfer station or a landfill.
Storage, Processing, and Treatment
Some facilities store waste to accumulate adequate quantity for transportation. Various processes can be used to accomplish this such as blending, neutralization, incineration and making the waste less hazardous/toxic or alter its physical, chemical or biological character or composition. Wastes are treated to make them more suitable for transportation to offsite for further treatment, recovery and reuse, or landfilling. Some facilities process waste in the same storage units before sending it offsite for appropriate management. Septage storage/treatment facilities are
These facilities need a permit or approval from IDEM to construct and operate, unless specifically exempted by a rule or statute.