-IR- Database Guide
-IR- Database: Indiana Register

TITLE 326 AIR POLLUTION CONTROL BOARD

SECOND NOTICE OF COMMENT PERIOD
LSA Document #11-774

DEVELOPMENT OF AMENDMENTS TO RULES CONCERNING ATTAINMENT OF THE LEAD NATIONAL AMBIENT AIR QUALITY STANDARDS


PURPOSE OF NOTICE
The Indiana Department of Environmental Management (IDEM) is soliciting public comment on amendments to rules at 326 IAC 1-4 concerning attainment of the lead national ambient air quality standards (NAAQS) and 326 IAC 15 concerning administrative changes, as well as the repeal of 326 IAC 20-13 and a new rule at 326 IAC 20-13.1 reflecting updates to the federal national emission standards for hazardous air pollutants (NESHAP). IDEM seeks comment on the affected citations listed and any other provisions of Title 326 that may be affected by this rulemaking.

HISTORY
First Notice of Comment Period: December 28, 2011, Indiana Register (DIN: 20111228-IR-326110774FNA).



SUBJECT MATTER AND BASIC PURPOSE OF RULEMAKING
Basic Purpose and Background
The Clean Air Act (CAA) requires the United States Environmental Protection Agency (U.S. EPA) to set primary and secondary NAAQS for the six common air pollutants considered harmful to public health and the environment, including lead, ground-level ozone, carbon monoxide, nitrogen dioxide, sulfur dioxide, and particulate matter. For each of these pollutants, the CAA requires U.S. EPA to set primary standards at a level judged to be "requisite to protect the public health with an adequate margin of safety", and establish secondary standards that are requisite to protect public welfare from "any known or anticipated effects associated with the pollutant in the ambient air", including effects on crops, vegetation, wildlife, buildings and national monuments, and visibility.
The CAA requires U.S. EPA to review these standards once every five years to determine whether revisions to the NAAQS are appropriate. U.S. EPA issued revised primary and secondary NAAQS for lead in the November 12, 2008, Federal Register (FR) published at 73 FR 66964. The revised NAAQS was strengthened by a factor of 10, from 1.5 μg/m3 using a quarterly average, to 0.15 μg/m3 using a rolling three month average. IDEM amended 326 IAC 1-3-4 in 2010 to incorporate the revised primary and secondary standards into the state rule.
Lead exposure can cause a range of adverse health effects, most notably in children. Exposures to low levels of lead early in life have been linked to effects on intelligence quotient scores, learning, memory, and behavior. The stronger standard provides increased protection against adverse health effects associated with exposure to lead in at-risk groups, including children. To provide increased protection against lead-related environmental and other welfare effects, U.S. EPA revised the secondary lead NAAQS to be identical to the revised primary standard. U.S. EPA also determined that the preexisting ambient lead monitoring network was inadequate for determining whether many areas were meeting the revised lead standards. U.S. EPA established new criteria for siting ambient lead monitors and new data collection requirements that were implemented in 2010.
The CAA requires U.S. EPA to complete the initial process of identifying or designating areas that meet or do not meet the NAAQS within two years. If the administrator of U.S. EPA has insufficient information to make these designations, U.S. EPA has the authority to extend the designation process by up to one year. Due to a newly developed monitoring network, U.S. EPA completed its designation process in two rounds. The first round, published on November 22, 2010, at 75 FR 71033, designated 16 areas, including a portion of the City of Muncie in Delaware County, as "nonattainment", meaning these areas violated the 2008 lead NAAQS based on data from the monitoring network in place prior to 2010. For areas designated nonattainment in 2010, states must develop a state implementation plan (SIP) that meets the requirements of the CAA. The SIPs must be submitted to U.S. EPA by June 30, 2012. The nonattainment areas must attain the lead NAAQS by December 31, 2015.
U.S. EPA designated all remaining areas of the United States, including the second round of nonattainment designations, on November 22, 2011, published at 76 FR 72097. U.S. EPA's decision was based on consideration of Indiana's designation recommendation letter and associated technical information, including the most recent air quality data from 2008 through 2010. U.S. EPA designated all areas of Indiana, except for the nonattainment area in Delaware County, as unclassifiable/attainment for the revised lead standards. This rulemaking will amend attainment classifications at 326 IAC 1-4 to reflect U.S. EPA's final unclassifiable/attainment designations in Indiana and nonattainment designation in Delaware County. This rulemaking will also make administrative changes to 326 IAC 15, including deleting sources that are no longer operating. Finally, this rulemaking will add emission standards for secondary lead smelters at 326 IAC 20-13.1, make necessary changes to address the federal revisions to the NESHAP for secondary lead smelters at 40 CFR 63, Subpart X, published in the Federal Register on January 5, 2012, at 77 FR 580, and include an expedited compliance schedule for certain NESHAP requirements for Exide Technologies, Inc. in Delaware County. This expedited schedule is necessary for Indiana to comply with the SIP requirements for areas designated nonattainment of the new lead NAAQS. In addition to adding 326 IAC 20-13.1, this rulemaking will repeal 326 IAC 20-13.
IC 13-14-9-4 Identification of Restrictions and Requirements Not Imposed under Federal Law
Exide Technologies, Inc., in Delaware County, is required to comply with an expedited compliance schedule for certain portions of the draft rule. No other element of the draft rule imposes either a restriction or a requirement on persons to whom the draft rule applies that is not imposed under federal law.
Potential Fiscal Impact
Exide Technologies, Inc., in Delaware County, is required to comply with an expedited compliance schedule for certain portions of the draft rule. There is no fiscal impact as this rulemaking will adopt requirements already imposed under federal law. At this time, IDEM cannot quantify the costs to the regulated community that may result from this rulemaking. As lead emission limitations and emission standards for secondary lead smelters are developed, IDEM will evaluate the costs of the proposed requirements. Affected sources may need to install additional air pollution control devices to meet the requirements proposed.
Public Participation and Workgroup Information
No workgroup is planned for the rulemaking. If you feel that a workgroup or other informal discussion on the rule is appropriate, please contact Ryan Knapick, Rule and State Implementation Plan Development Section, Office of Air Quality at (317) 232-8229 or (800) 451-6021 (in Indiana).

SUMMARY/RESPONSE TO COMMENTS FROM THE FIRST COMMENT PERIOD
IDEM requested public comment from December 28, 2011, through January 27, 2011, on alternative ways to achieve the purpose of the rule and suggestions for the development of draft rule language. IDEM received no comments in response to the first notice of public comment period.

REQUEST FOR PUBLIC COMMENTS
This notice requests the submission of comments on the draft rule language, including suggestions for specific revisions to language to be contained in the draft rule. Comments may be submitted in one of the following ways:
(1) By mail or common carrier to the following address:
LSA Document #11-774 Lead Standard Attainment
Ryan Knapick Mail Code 61-50
Rule and State Implementation Plan Development Section
Office of Air Quality
Indiana Department of Environmental Management
100 North Senate Avenue
Indianapolis, IN 46204-2251
(2) By facsimile to (317) 233-5967. Please confirm the timely receipt of faxed comments by calling the Rule and State Implementation Plan Development Section at (317) 234-6530.
(3) By electronic mail to rknapick@idem.in.gov. To confirm timely delivery of submitted comments, please request a document receipt when sending the electronic mail. PLEASE NOTE: Electronic mail comments will NOT be considered part of the official written comment period unless they are sent to the email address indicated in this notice.
(4) Hand delivered to the receptionist on duty at the tenth floor reception desk, Office of Air Quality, Indiana Government Center North, 100 North Senate Avenue, Indianapolis, Indiana.
Regardless of the delivery method used, in order to properly identify each comment with the rulemaking action it is intended to address, each comment document must clearly specify the LSA document number of the rulemaking.

COMMENT PERIOD DEADLINE
All comments must be postmarked, faxed, or time stamped no later than July 13, 2012. Hand-delivered comments must be delivered to the appropriate office by 4:45 p.m. on the above-listed deadline date.
Additional information regarding this action may be obtained from Ryan Knapick, Rule and State Implementation Plan Development Section, Office of Air Quality, (317) 232-8229 or (800) 451-6027 (in Indiana).

DRAFT RULE

SECTION 1. 326 IAC 1-4-2 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-2 Adams County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 2. The following attainment status designations are applicable to Adams County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-2; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 2. 326 IAC 1-4-3 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-3 Allen County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 3. The following attainment status designations are applicable to Allen County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective February 12, 2007, for the Fort Wayne area, including Allen County, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-3; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 3. 326 IAC 1-4-4 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-4 Bartholomew County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 4. The following attainment status designations are applicable to Bartholomew County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-4; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 4. 326 IAC 1-4-5 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-5 Benton County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 5. The following attainment status designations are applicable to Benton County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-5; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 5. 326 IAC 1-4-6 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-6 Blackford County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 6. The following attainment status designations are applicable to Blackford County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-6; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 6. 326 IAC 1-4-7 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-7 Boone County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 7. The following attainment status designations are applicable to Boone County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-7; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 7. 326 IAC 1-4-8 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-8 Brown County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 8. The following attainment status designations are applicable to Brown County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-8; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 8. 326 IAC 1-4-9 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-9 Carroll County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 9. The following attainment status designations are applicable to Carroll County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-9; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 9. 326 IAC 1-4-10 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-10 Cass County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 10. The following attainment status designations are applicable to Cass County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-10; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 10. 326 IAC 1-4-11 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-11 Clark County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 11. The following attainment status designations are applicable to Clark County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective July 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Attainment effective October 23, 2001, for the 1-hour ozone standard for the Louisville area, including Clark County, and is a maintenance area for the 1-hour ozone National Ambient Air Quality Standard (NAAQS) for purposes of 40 CFR Part 51, Subpart X*. The 1-hour standard was revoked effective June 15, 2005. 

*These documents are incorporated by reference. Copies referenced in this section may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 1-4-11; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 11. 326 IAC 1-4-12 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-12 Clay County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 12. The following attainment status designations are applicable to Clay County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-12; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 12. 326 IAC 1-4-13 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-13 Clinton County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 13. The following attainment status designations are applicable to Clinton County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-13; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 13. 326 IAC 1-4-14 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-14 Crawford County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 14. The following attainment status designations are applicable to Crawford County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-14; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 14. 326 IAC 1-4-15 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-15 Daviess County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 15. The following attainment status designations are applicable to Daviess County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-15; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 15. 326 IAC 1-4-16, PROPOSED TO BE AMENDED AT 20120125-IR-326120044FDA, SECTION 1, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-16 Dearborn County

Authority: IC 13-14-8; IC 13-17
Affected: IC 13-15


Sec. 16. The following attainment status designations are applicable to Dearborn County:
Pollutant  Designation 
SO2  Cannot be classified. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective May 11, 2010, for the 8-hour ozone standard.1 
PM2.5  Attainment effective December 23, 2011, for the annual PM2.5 standard for Lawrenceburg Township. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-16; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed Oct 15, 2010, 1:51 p.m.: 20101110-IR-326100342FRA)


SECTION 16. 326 IAC 1-4-17 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-17 Decatur County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 17. The following attainment status designations are applicable to Decatur County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-17; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 17. 326 IAC 1-4-18 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-18 Dekalb County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 18. The following attainment status designations are applicable to Dekalb County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-18; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 18. 326 IAC 1-4-19 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-19 Delaware County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 19. The following attainment status designations are applicable to Delaware County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective January 3, 2006, for the Muncie area, including Delaware County, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Nonattainment effective December 31, 2010, for a portion of the city of Muncie, Indiana bounded to the north by West Street/Hines Road, to the east by Cowan Road, to the south by West Fuson Road, and to the west by a line running south from the eastern edge of Victory Temple's driveway to South Hoyt Avenue and then along South Hoyt Avenue. Unclassifiable or attainment effective December 31, 2011, for the remainder of the county. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-19; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 19. 326 IAC 1-4-20, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 1, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-20 Dubois County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 20. The following attainment status designations are applicable to Dubois County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM2.5  Attainment effective October 27, 2011, for the annual PM2.5 standard. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-20; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 20. 326 IAC 1-4-21 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-21 Elkhart County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 21. The following attainment status designations are applicable to Elkhart County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective July 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Attainment effective October 18, 2000, for the 1-hour ozone standard for the South Bend-Elkhart area, including Elkhart County, and is a maintenance area for the 1-hour National Ambient Air Quality Standards (NAAQS) for purposes of 40 CFR 51, Subpart X*. The 1-hour standard was revoked effective June 15, 2005. 

*These documents are incorporated by reference. Copies referenced in this section may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 1-4-21; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 21. 326 IAC 1-4-22 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-22 Fayette County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 22. The following attainment status designations are applicable to Fayette County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-22; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 22. 326 IAC 1-4-23 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-23 Floyd County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 23. The following attainment status designations are applicable to Floyd County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective July 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Attainment effective October 23, 2001, for the 1-hour ozone standard for the Louisville area, including Floyd County, and is a maintenance area for the 1-hour ozone National Ambient Air Quality Standard (NAAQS) for purposes of 40 CFR Part 51, Subpart X*. The 1-hour standard was revoked effective June 15, 2005. 

*These documents are incorporated by reference. Copies referenced in this section may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 1-4-23; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 23. 326 IAC 1-4-24 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-24 Fountain County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 24. The following attainment status designations are applicable to Fountain County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-24; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 24. 326 IAC 1-4-25 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-25 Franklin County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 25. The following attainment status designations are applicable to Franklin County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-25; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 25. 326 IAC 1-4-26 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-26 Fulton County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 26. The following attainment status designations are applicable to Fulton County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-26; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 26. 326 IAC 1-4-27, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 2, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-27 Gibson County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 27. The following attainment status designations are applicable to Gibson County:
Pollutant  Designation 
SO2  Cannot be classified. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM2.5  Attainment effective October 27, 2011, for the annual PM2.5 standard for Montgomery Township. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-27; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 27. 326 IAC 1-4-28 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-28 Grant County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 28. The following attainment status designations are applicable to Grant County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-28; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 28. 326 IAC 1-4-29 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-29 Greene County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 29. The following attainment status designations are applicable to Greene County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective December 29, 2005, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-29; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 29. 326 IAC 1-4-30 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-30 Hamilton County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 30. The following attainment status designations are applicable to Hamilton County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-30; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 30. 326 IAC 1-4-31 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-31 Hancock County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 31. The following attainment status designations are applicable to Hancock County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-31; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 31. 326 IAC 1-4-32 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-32 Harrison County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 32. The following attainment status designations are applicable to Harrison County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-32; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 32. 326 IAC 1-4-33 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-33 Hendricks County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 33. The following attainment status designations are applicable to Hendricks County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-33; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 33. 326 IAC 1-4-34 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-34 Henry County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 34. The following attainment status designations are applicable to Henry County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-34; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 34. 326 IAC 1-4-35 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-35 Howard County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 35. The following attainment status designations are applicable to Howard County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-35; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 35. 326 IAC 1-4-36 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-36 Huntington County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 36. The following attainment status designations are applicable to Huntington County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-36; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 36. 326 IAC 1-4-37 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-37 Jackson County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 37. The following attainment status designations are applicable to Jackson County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective December 29, 2005, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-37; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 37. 326 IAC 1-4-38 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-38 Jasper County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 38. The following attainment status designations are applicable to Jasper County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-38; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 38. 326 IAC 1-4-39 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-39 Jay County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 39. The following attainment status designations are applicable to Jay County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-39; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 39. 326 IAC 1-4-40 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-40 Jefferson County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 40. The following attainment status designations are applicable to Jefferson County:
Pollutant  Designation 
SO2  Cannot be classified. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-40; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 40. 326 IAC 1-4-41 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-41 Jennings County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 41. The following attainment status designations are applicable to Jennings County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-41; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 41. 326 IAC 1-4-42 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-42 Johnson County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 42. The following attainment status designations are applicable to Johnson County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-42; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 42. 326 IAC 1-4-43 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-43 Knox County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 43. The following attainment status designations are applicable to Knox County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment as of June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-43; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 43. 326 IAC 1-4-44 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-44 Kosciusko County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 44. The following attainment status designations are applicable to Kosciusko County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-44; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 44. 326 IAC 1-4-45 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-45 LaGrange County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 45. The following attainment status designations are applicable to LaGrange County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-45; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 45. 326 IAC 1-4-46, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 3, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-46 Lake County

Authority: IC 13-14-8; IC 13-17
Affected: IC 13-15


Sec. 46. The following attainment status designations are applicable to Lake County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Attainment effective February 18, 2000, for the part of the city of East Chicago bounded by Columbus Drive on the north; the Indiana Harbor Canal on the west; 148th Street, if extended, on the south; and Euclid Avenue on the east. Unclassifiable or attainment effective November 15, 1990, for the remainder of East Chicago and Lake County. 
O3  Attainment effective May 11, 2010, for the 8-hour ozone standard.1 
PM2.5  Attainment effective February 6, 2012, for the annual PM2.5 standard. 
PM10  Attainment effective March 11, 2003, for the cities of East Chicago, Hammond, Whiting, and Gary. Unclassifiable effective November 15, 1990, for the remainder of Lake County. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Nonattainment Severe 17 effective November 15, 1990, for the Chicago-Gary-Lake County area for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-46; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed Oct 15, 2010, 1:51 p.m.: 20101110-IR-326100342FRA)


SECTION 46. 326 IAC 1-4-47 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-47 LaPorte County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 47. The following attainment status designations are applicable to LaPorte County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective July 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective November 15, 1990, for the 1-hour standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-47; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 47. 326 IAC 1-4-48 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-48 Lawrence County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 48. The following attainment status designations are applicable to Lawrence County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-48; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 48. 326 IAC 1-4-49 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-49 Madison County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 49. The following attainment status designations are applicable to Madison County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-49; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 49. 326 IAC 1-4-50 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-50 Marion County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 50. The following attainment status designations are applicable to Marion County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Attainment effective February 18, 2000, for the part of the city of Indianapolis bounded by 11th Street on the north; Capitol Avenue on the west; Georgia Street on the south; and Delaware Street on the east. Unclassifiable or attainment effective November 15, 1990, for the remainder of Indianapolis and Marion County. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Attainment effective July 10, 2000, for the part of Franklin Township bounded by Thompson Road on the south; Emerson Avenue on the west; Five Points Road on the east; and Troy Avenue on the north. Attainment effective July 10, 2000, for the part of Wayne Township bounded by Rockville Road on the north; Girls School Road on the east; Washington Street on the south; and Bridgeport Road on the west. The remainder of the county is not designated. Unclassifiable or attainment effective December 31, 2011. 
1Attainment effective October 18, 2000, for the 1-hour ozone standard for the Indianapolis area, including Marion County, and is a maintenance area for the 1-hour ozone National Ambient Air Quality Standards (NAAQS) for purposes of 40 CFR 51, Subpart X*. The 1-hour designation was revoked effective June 15, 2005. 

*These documents are incorporated by reference. Copies referenced in this section may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 1-4-50; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 50. 326 IAC 1-4-51 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-51 Marshall County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 51. The following attainment status designations are applicable to Marshall County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-51; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 51. 326 IAC 1-4-52 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-52 Martin County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 52. The following attainment status designations are applicable to Martin County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-52; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 52. 326 IAC 1-4-53 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-53 Miami County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 53. The following attainment status designations are applicable to Miami County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-53; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 53. 326 IAC 1-4-54 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-54 Monroe County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 54. The following attainment status designations are applicable to Monroe County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-54; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 54. 326 IAC 1-4-55 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-55 Montgomery County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 55. The following attainment status designations are applicable to Montgomery County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-55; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 55. 326 IAC 1-4-56 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-56 Morgan County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 56. The following attainment status designations are applicable to Morgan County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-56; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 56. 326 IAC 1-4-57 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-57 Newton County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 57. The following attainment status designations are applicable to Newton County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-57; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 57. 326 IAC 1-4-58 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-58 Noble County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 58. The following attainment status designations are applicable to Noble County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-58; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 58. 326 IAC 1-4-59 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-59 Ohio County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 59. The following attainment status designations are applicable to Ohio County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-59; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 59. 326 IAC 1-4-60 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-60 Orange County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 60. The following attainment status designations are applicable to Orange County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-60; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 60. 326 IAC 1-4-61 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-61 Owen County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 61. The following attainment status designations are applicable to Owen County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment is effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-61; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 61. 326 IAC 1-4-62 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-62 Parke County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 62. The following attainment status designations are applicable to Parke County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-62; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 62. 326 IAC 1-4-63 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-63 Perry County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 63. The following attainment status designations are applicable to Perry County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-63; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 63. 326 IAC 1-4-64, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 4, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-64 Pike County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 64. The following attainment status designations are applicable to Pike County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM2.5  Attainment effective October 27, 2011, for the annual PM2.5 standard for Washington Township. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-64; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 64. 326 IAC 1-4-65, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 5, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-65 Porter County

Authority: IC 13-14-8; IC 13-17
Affected: IC 13-15


Sec. 65. The following attainment status designations are applicable to Porter County:
Pollutant  Designation 
SO2  Cannot be classified for the area bounded on the north by Lake Michigan; on the west by the Lake County and Porter County line; on the south by I-80 and I-90; and on the east by the LaPorte County and Porter County line. The remainder of Porter County is better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective May 11, 2010, for the 8-hour ozone standard.1 
PM2.5  Attainment effective February 6, 2012, for the annual PM2.5 standard. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Nonattainment Severe 17 effective November 15, 1990, for the Chicago-Gary-Lake County area, including Porter County, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-65; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed Oct 15, 2010, 1:51 p.m.: 20101110-IR-326100342FRA)


SECTION 65. 326 IAC 1-4-66 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-66 Posey County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 66. The following attainment status designations are applicable to Posey County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-66; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 66. 326 IAC 1-4-67 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-67 Pulaski County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 67. The following attainment status designations are applicable to Pulaski County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-67; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 67. 326 IAC 1-4-68 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-68 Putnam County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 68. The following attainment status designations are applicable to Putnam County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-68; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 68. 326 IAC 1-4-69 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-69 Randolph County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 69. The following attainment status designations are applicable to Randolph County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-69; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 69. 326 IAC 1-4-70 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-70 Ripley County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 70. The following attainment status designations are applicable to Ripley County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-70; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 70. 326 IAC 1-4-71 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-71 Rush County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 71. The following attainment status designations are applicable to Rush County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-71; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 71. 326 IAC 1-4-72 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-72 Scott County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 72. The following attainment status designations are applicable to Scott County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-72; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 72. 326 IAC 1-4-73 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-73 Shelby County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 73. The following attainment status designations are applicable to Shelby County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective October 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard, which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-73; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA; filed May 14, 2008, 2:36 p.m.: 20080611-IR-326070840FRA)


SECTION 73. 326 IAC 1-4-74, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 6, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-74 Spencer County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 74. The following attainment status designations are applicable to Spencer County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM2.5  Attainment effective October 27, 2011, for the annual PM2.5 standard for Ohio Township. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-74; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 74. 326 IAC 1-4-75 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-75 Starke County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 75. The following attainment status designations are applicable to Starke County:
Pollutant  Designations 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-75; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 75. 326 IAC 1-4-76 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-76 Steuben County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 76. The following attainment status designations are applicable to Steuben County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-76; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 76. 326 IAC 1-4-77 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-77 St. Joseph County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 77. The following attainment status designations are applicable to St. Joseph County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective July 19, 2007, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Attainment effective October 18, 2000, for the 1-hour ozone standard for the South Bend-Elkhart area, including St. Joseph County, and is a maintenance area for the 1-hour ozone National Ambient Air Quality Standards (NAAQS) for purposes of 40 CFR 51, Subpart X*. The 1-hour standard was revoked effective June 15, 2005. 

*These documents are incorporated by reference. Copies referenced in this section may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 1-4-77; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 77. 326 IAC 1-4-78 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-78 Sullivan County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 78. The following attainment status designations are applicable to Sullivan County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-78; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 78. 326 IAC 1-4-79 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-79 Switzerland County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 79. The following attainment status designations are applicable to Switzerland County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-79; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 79. 326 IAC 1-4-80 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-80 Tippecanoe County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 80. The following attainment status designations are applicable to Tippecanoe County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-80; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 80. 326 IAC 1-4-81 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-81 Tipton County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 81. The following attainment status designations are applicable to Tipton County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-81; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 81. 326 IAC 1-4-82 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-82 Union County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 82. The following attainment status designations are applicable to Union County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-82; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 82. 326 IAC 1-4-83, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 7, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-83 Vanderburgh County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 83. The following attainment status designations are applicable to Vanderburgh County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective January 30, 2006, for the Evansville area, including Vanderburgh County, for the 8-hour ozone standard.1 
PM2.5  Attainment effective October 27, 2011, for the annual PM2.5 standard. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Attainment effective October 18, 2000, for the 1-hour ozone standard for the Evansville area, including Vanderburgh County, and is a maintenance area for the 1-hour ozone National Ambient Air Quality Standards (NAAQS) for purposes of 40 CFR 51, Subpart X*. The 1-hour designation was revoked effective June 15, 2005. 

*These documents are incorporated by reference. Copies referenced in this section may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 1-4-83; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 83. 326 IAC 1-4-84 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-84 Vermillion County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 84. The following attainment designated as status designations are applicable to Vermillion County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Attainment effective October 27, 1997, for the part of Clinton Township that includes sections 15, 16, 21, 22, 27, 28, 33, and 34. Unclassifiable effective November 15, 1990, for the remainder of Vermillion County. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-84; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 84. 326 IAC 1-4-85 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-85 Vigo County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 85. The following attainment status designations are applicable to Vigo County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective February 6, 2006, for the Terre Haute area, including Vigo County, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-85; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 85. 326 IAC 1-4-86 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-86 Wabash County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 86. The following attainment status designations are applicable to Wabash County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-86; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 86. 326 IAC 1-4-87 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-87 Warren County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 87. The following attainment status designations are applicable to Warren County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-87; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 87. 326 IAC 1-4-88, PROPOSED TO BE AMENDED AT 20111221-IR-326110742FDA, SECTION 8, IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-88 Warrick County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 88. The following attainment status designations are applicable to Warrick County:
Pollutant  Designation 
SO2  Cannot be classified. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Attainment effective January 30, 2006, for the Evansville area, including Warrick County, for the 8-hour ozone standard.1 
PM2.5  Attainment effective October 27, 2011, for the annual PM2.5 standard. 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-88; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 88. 326 IAC 1-4-89 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-89 Washington County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 89. The following attainment status designations are applicable to Washington County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-89; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 89. 326 IAC 1-4-90 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-90 Wayne County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 90. The following attainment status designations are applicable to Wayne County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-90; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 90. 326 IAC 1-4-91 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-91 Wells County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 91. The following attainment status designations are applicable to Wells County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-91; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 91. 326 IAC 1-4-92 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-92 White County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 92. The following attainment status designations are applicable to White County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-92; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 92. 326 IAC 1-4-93 IS AMENDED TO READ AS FOLLOWS:

326 IAC 1-4-93 Whitley County

Authority: IC 13-14-8; IC 13-17-3
Affected: IC 13-15; IC 13-17


Sec. 93. The following attainment status designations are applicable to Whitley County:
Pollutant  Designation 
SO2  Better than national standards. 
CO  Unclassifiable or attainment effective November 15, 1990. 
O3  Unclassifiable or attainment effective June 15, 2004, for the 8-hour ozone standard.1 
PM10  Unclassifiable effective November 15, 1990. 
NO2  Cannot be classified or better than national standards. 
Pb  Not designated. Unclassifiable or attainment effective December 31, 2011. 
1Unclassifiable or attainment effective October 18, 2000, for the 1-hour ozone standard which was revoked effective June 15, 2005. 
(Air Pollution Control Board; 326 IAC 1-4-93; filed Dec 26, 2007, 1:43 p.m.: 20080123-IR-326070308FRA)


SECTION 93. 326 IAC 15-1-2 IS AMENDED TO READ AS FOLLOWS:

326 IAC 15-1-2 Source-specific provisions

Authority: IC 13-14-8; IC 13-17-3-4
Affected: IC 13-17


Sec. 2. (a) The sources listed below shall comply with the following emission and operating provisions:
   
      Emission Limitation 
Source  Facility Description  lbs./hr. 
(1)  Refined Metals of Indianapolis  M-1 baghouse stack1  0.91 
    M-2 baghouse stack1  0.15 
    M-3 baghouse stack1  0.15 
    M-4 baghouse stack1  0.30 
1Compliance shall be achieved on or before April 30, 1992. 
(A) On or before June 1, 1987, Refined Metals of Indianapolis shall install and operate hooding systems for the blast furnace skip hoist and charging area, the blast furnace slag and lead tapping area, the casting area, the refining kettles, and the lead dust furnace charging area.
(B) The hooding systems required for the operations listed in clause (A) shall vent the emissions through a control device to one (1) of the four (4) stacks, M-1 through M-4.
(C) On or before June 1, 1987, Refined Metals of Indianapolis shall also install and operate enclosed screw conveyors to transport lead flue dusts to the lead dust furnace. There shall be no visible emissions from the screw conveyors. Compliance shall be determined by 40 CFR 60, Appendix A, Method 22**.
(D) The buildings housing the blast furnace, dust furnace, and materials storage shall be kept under continuous negative pressure by constant flow rate fans ducted to control devices.
(E) The company shall install and operate a continuous monitoring system to measure and record pressure differential to ensure that the materials storage building and the blast/dust furnace area are maintained under negative pressure while the plant is in operation. The monitoring system shall be located on the north wall of the materials storage building. It shall consist of a differential pressure sensor/transmitter, a processor, and a recording device. This system shall produce valid data ninety-five percent (95%) of the time when the plant is operating. Data generated by this monitoring system shall be kept available for inspection at the site for a period of two (2) years.
(F) The blast furnace and the dust furnace fugitive emissions shall be drawn from the enclosure by a constant flow rate fan to a control device. The control device shall vent to the atmosphere through the M-4 baghouse stack which shall be at least eighty (80) feet in height from ground level.
(G) Visible emissions from the M-1, M-2, M-3, and M-4 baghouse stacks shall not exceed a six (6) minute average of five percent (5%) opacity for each stack as determined in accordance with 40 CFR 60, Appendix A, Method 9**.
(H) Visible emissions from building openings such as doors and windows shall not exceed a three (3) minute average of three percent (3%) opacity. Compliance with this limitation shall be determined by 40 CFR 60, Appendix A, Method 9**, except that the opacity standard shall be determined as an average of twelve (12) consecutive observations recorded at fifteen (15) second intervals.
(I) Refined Metals of Indianapolis shall install and operate continuous opacity monitoring systems in the M-1 and the M-4 baghouse stacks or in the ductwork leading to those stacks. COMS data shall be used to determine compliance with the five percent (5%) opacity limit required by clause (G). The COMS shall meet the performance and installation requirements of 40 CFR 60, Appendix B, Performance Specification 1**. The company shall also comply with the following:
(i) A complete written standard operating procedure (SOP) for COMS shall be submitted to the department for approval. The department shall complete the review of the COMS SOP within sixty (60) days of submittal. The COMS SOP shall contain, at minimum, complete step-by-step procedures for the following:
(AA) Calibration procedures.
(BB) Operation procedures.
(CC) Preventive maintenance procedures.
(DD) Quality control and quality assurance (QA) procedures.
(EE) Record keeping and reporting procedures.
(ii) The company shall perform quarterly COMS performance audits and notify the department fourteen (14) days in advance of each audit. The company shall submit quarterly COMS QA reports to the department within thirty (30) days following the end of the quarter. Each report shall summarize performance audit results and provide an explanation for periods of time during the quarter when valid data was not collected.
(iii) COMS excess emission reports shall be submitted to the department within thirty (30) days following the end of each calendar quarter. These reports shall contain, at minimum, the following:
(AA) The operating time of the monitored facilities.
(BB) The date and time each COMS recorded opacity measurements above the five percent (5%) opacity limit.
(CC) The date and time each COMS was inoperative or malfunctioning.
(DD) A description of the nature and cause of any excess emissions.
(J) Refined Metals of Indianapolis shall achieve compliance with clauses (D) through (I) by March 1, 1994. In the event that the plant is idle on March 1, 1994, compliance with clauses (D) through (I) shall be achieved by the date the plant resumes production. Refined Metals shall notify the department thirty (30) days before production resumes to enable the department to make a compliance determination.
(K) Refined Metals of Indianapolis shall perform a stack test on the M-1, M-2, M-3, and M-4 baghouse stacks and demonstrate compliance with this subdivision by June 30, 1992. All subsequent stack tests shall be conducted utilizing the methodologies of 40 CFR 60, Appendix A, Methods 1, 2, 3, 4, 5, and 12**.
(L) Any violation of the National Ambient Air Quality Standards (NAAQS) shall result in an investigation by Refined Metals to determine the cause of the violation. Such an investigation shall be completed within ninety (90) days after the date the violation is confirmed. Refined Metals shall provide a corrective action plan to the department for approval within ninety (90) days of the confirmation of the violation. The plan shall specify the actions required to continuously meet the NAAQS. Refined Metals shall implement the plan upon approval by the department. The department may require a cessation in production, if needed, to assure continuous attainment of the NAAQS.
(2)  Chrysler Corporation Foundry, Indianapolis  Cupola stack  0.550 
    Cupola fugitive  1.894 
(3)  Delco Remy Division of General Motors  Lead oxide mfg. stack (each of 5)  0.068 
  Corporation, Muncie  Oxide grinder stack (each of 2)  0.123 
    *Central tunnel system stack (each of 4)  0.254 
    Reverberatory furnace stack  0.225 
    O.S.I. drying oven stack (each of 4)  0.0015 
    Electric melting pot stack  0.159 
*On or before June 1, 1987, Delco Remy shall install ductwork to vent emissions from the vacuum cleaning lines through the control devices and stacks serving the Central Tunnel System. 
Source  Emission Unit  Emission Limitation lbs/hr 
(4) (1)  Indiana Oxide Corporation, Brazil  Barton #1 reactor  0.215 
    Barton #2 reactor  0.215 
    Barton #3 reactor  0.215 
    Barton #4 reactor  0.215 
    Rake furnace  0.006 
    Kiln #2  0.002 
    *Franklin reactor  0.603 
*Shall not operate more than 670 hours per quarter. 
(5)  U.S.S. Lead Refinery, East Chicago  *Blast furnace stack  0.002 
    *Blast furnace fugitive   
    Charging  2.922 
    Lead tapping  0.002 
    Slag tapping  0.005 
    *Refining kettles fugitive  0.0001 
    *Casting fugitive  0.393 
    *Reverberatory furnace fugitive  0.345 
*Shall not operate more than 334 hours per quarter. 
(6) (2)  Hammond Lead Products, Inc., HLP-Lead Plant  Stack 4A-S-8  0.053 
    Stack 14-S-16  0.053 
    Stack 1-S-2  0.053 
    Stack 1-S-26  0.053 
    Stack 16-S-56  0.200 
    Stack 1-S-52  0.070 
    Stack 1-S-27  0.020 
    Stack 4-S-35  0.090 
    Stack 6-S-33  0.070 
    Stack 4B-S-34  0.080 
    Stack 6-S-47  0.021 
    Stack V-1  0.090 
    Stack V-11  0.006 
(A) The ventilator control system (Stack V-1) shall consist of a fan with a constant flow rate that draws air from the building through a HEPA filter which vents to the atmosphere through a stack. The HEPA filters shall be maintained and operated in order to achieve maximum control efficiency. In addition to the requirements contained in subsection (c), Hammond Lead Products, Inc. shall submit an operation and maintenance plan by July 31, 1990, which incorporates good housekeeping practices for the ventilator control systems. This operation and maintenance plan shall be incorporated into the operating permits for Hammond Lead Products, Inc. and submitted to U.S. EPA as a revision to Indiana's lead state implementation plan by December 31, 1990. The ventilator control systems shall be designed such so that process fugitive emissions will not routinely escape the buildings except as vented through the ventilator control systems. The compliance test method specified in section 4(a) of this rule shall be used to determine compliance with the emission limitations for the ventilator control system stacks.
(B) By December 31, 1989, the stack heights for all processes except Stack 16-S-56, Stack 1-S-52, and the ventilator control systems shall be no less than sixty (60) feet above grade; the stack heights for Stack 16-S-56 and Stack 1-S-52 shall be no less than eighty-two (82) feet above grade. and the stack height for Vent 11 shall be no less than thirty-five (35) feet above grade. By July 31, 1990, the stack heights for the other ventilator control systems shall be no less than sixty (60) feet above grade.
(C) Hammond Lead Products, Inc. shall install HEPA filters according to the following schedule:
  Stack 4A-S-8  March 31, 1992 
  Stack 14-S-16  June 30, 1992 
  Stack 1-S-2  December 31, 1991 
  Stack 1-S-26  September 30, 1992 
  *Stack 16-S-56:   
    130 bag filter  November 20, 1989 
    100 bag filter  December 6, 1989 
    80 bag filter  June 1, 1989 
    72 bag filter  December 31, 1991 
  Stack 1-S-52  December 31, 1989 
  Stack 1-S-27  August 15, 1987 
  Stack 4-S-35  October 16, 1989 
  Stack 6-S-33  July 22, 1988 
  Stack 4B-S-34  October 5, 1989 
  Stack 6-S-47  May 26, 1988 
  *Four (4) bag filters are vented through common Stack 16-S-56. 
(D) Hammond Lead Products, Inc. shall provide written notification to the commissioner within three (3) days after the installation of HEPA filters is completed at each of the sites listed in clause (A).
(E) All emissions emission limitations in this subdivision shall be met by December 31, 1992.
(F) This subdivision shall be submitted to the U.S. EPA as a revision to the Indiana state implementation plan.
Source  Emission Unit  Emission Limitation lbs/hr 
(7) (3)  Hammond Group-Halstab Division  Stack S-1  0.04 
    Stack S-2  0.03 
    Stacks S-4, S-5 (each)  0.07 
    Stacks S-6, S-7, S-8 (each)  0.05 
    Stacks S-9, S-10, S-11 (each)  0.04 
    S-12, S-13 (each)  0.04 
    S-14, S-15, S-16 (each)  0.04 
    Stacks S-17, S-21 (each)  0.07 
(A) Hammond Group-Halstab Division shall install and maintain one (1) baghouse with laminated filters followed by one (1) HEPA filter in series with the baghouse on each of stacks S-1, S-2, S-4 through S-17, and S-21.
(B) Hammond Group-Halstab Division shall submit a proposed ambient monitoring and quality assurance plan within thirty (30) days of the effective date of this rule. March 10, 1988.
(C) Hammond Group-Halstab Division shall commence ambient monitoring within thirty (30) days of the department's approval of the proposed ambient monitoring and quality assurance plan.
(D) Hammond Group-Halstab Division shall conduct a minimum of twenty-four (24) months of monitoring for lead. The monitoring shall be:
(i) performed using U.S. EPA-approved methods, procedures, and quality assurance programs; and
(ii) in accordance with the ambient monitoring and quality assurance plan as approved by the department.
(E) The requirement to monitor shall expire twenty-four (24) months from the commencement date of the monitoring provided the monitored values, averaged over a calendar quarter, do not exceed eighty percent (80%) of the National Ambient Air Quality Standards (NAAQS) level for lead in any quarter during twenty-four (24) months.
(F) If the monitored values averaged over a calendar quarter exceed eighty percent (80%) of the NAAQS level for lead during the twenty-four (24) month period, monitoring shall be continued until eight (8) continuous quarters of monitored values do not exceed eighty percent (80%) of the NAAQS level for lead.
(G) If the monitored values, averaged over a calendar quarter, exceed eighty percent (80%) of the NAAQS level for lead for two (2) or more continuous quarters, the department and Hammond Group-Halstab Division shall analyze and assess causes of the emissions and determine whether changes to control requirements or operating practices are appropriate.

(b) In addition to the sources listed in subsection (a), the following sources C & D Batteries, Attica, shall comply with subsection (c) and section 3 of this rule.
(1) Exide Corporation, Logansport.
(2) C & D Batteries, Attica.
(3) Exide Corporation, Frankfort.

(c) Operation and maintenance programs shall be designed to prevent deterioration of control equipment performance. For sources listed in subsection (a)(1) through (a)(7), (a)(3), these programs shall be submitted to the department of environmental management, office of air management, on or before June 1, 1987. For sources the source listed in subsection (b), these programs shall be submitted to the office of air management department on or before February 1, 1988. These programs will be incorporated into the individual source operation permits.

**These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center-North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 15-1-2; filed Mar 10, 1988, 1:20 p.m.: 11 IR 2564; errata filed Jul 6, 1988, 1:00 p.m.: 11 IR 3921; filed Jun 14, 1989, 5:00 p.m.: 12 IR 1850; filed Aug 8, 1991, 10:00 a.m.: 14 IR 2203; filed Dec 17, 1992, 5:00 p.m.: 16 IR 1379; errata filed Mar 10, 1993, 5:00 p.m.: 16 IR 1832; filed Mar 28, 1994, 5:00 p.m.: 17 IR 1878; errata, 17 IR 2080; filed May 31, 1994, 5:00 p.m.: 17 IR 2233; errata filed Jun 10, 1994, 5:00 p.m.: 17 IR 2356; filed Jan 6, 1999, 4:23 p.m.: 22 IR 1427; filed Dec 1, 2000, 2:22 p.m.: 24 IR 954; readopted filed Jan 10, 2001, 3:20 p.m.: 24 IR 1477; errata filed Dec 12, 2002, 3:30 p.m.: 26 IR 1565; filed Aug 26, 2004, 11:30 a.m.: 28 IR 95)


SECTION 94. 326 IAC 15-1-3 IS AMENDED TO READ AS FOLLOWS:

326 IAC 15-1-3 Control of fugitive lead dust

Authority: IC 13-14-8; IC 13-17-3-4
Affected: IC 13-11; IC 13-17


Sec. 3. All sources listed in section 2 of this rule shall comply with the following requirements:
(1) No source shall create or maintain outdoor storage of bulk materials containing more than one percent (1.0%) lead by weight of less than two hundred (200) mesh size particles.
(2) All materials containing more than one percent (1.0%) lead by weight of less than two hundred (200) mesh size particles shall be transported in closed containers or shall be transported by enclosed conveying systems that are vented to the atmosphere through particulate matter control equipment or shall be transported wet.
(3) Control programs shall be designed to minimize emissions of lead from all nonprocess fugitive emission points. The programs shall include good housekeeping practices for the cleanup of spills and for minimizing emissions from loading and unloading areas as applicable. For sources listed in section 2(a) of this rule, these programs shall be submitted to the department of environmental management, office of air management, on or before June 1, 1987. For sources the source listed in section 2(b) of this rule, these programs shall be submitted to the department of environmental management, office of air management, on or before February 1, 1988. These programs will be incorporated into the individual source operation permits.
(Air Pollution Control Board; 326 IAC 15-1-3; filed Mar 10, 1988, 1:20 p.m.: 11 IR 2566; errata filed Jul 6, 1988, 1:00 p.m.: 11 IR 3921; filed Jun 14, 1989, 5:00 p.m.: 12 IR 1853; filed Dec 1, 2000, 2:22 p.m.: 24 IR 958; readopted filed Jan 10, 2001, 3:20 p.m.: 24 IR 1477)


SECTION 95. 326 IAC 15-1-4 IS AMENDED TO READ AS FOLLOWS:

326 IAC 15-1-4 Compliance

Authority: IC 13-14-8; IC 13-17-3-4
Affected: IC 13-17


Sec. 4. (a) Determination of compliance with the lead emission limitations established pursuant to section 2 of this rule shall be made in accordance with the procedures outlined in 40 CFR 60, Appendix A, Method 12,* and 326 IAC 3-2, 326 IAC 3-6, Source Sampling Procedures.

(b) Those sources having restricted operating hours specified in section 2 of this rule shall be as follows:
(1) Maintain logs indicating hours of operation each day.
(2) Submit quarterly summaries of operating logs to the department of environmental management, office of air management, before the end of the month following the completed quarter.

*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 15-1-4; filed Mar 10, 1988, 1:20 p.m.: 11 IR 2567; filed Jun 14, 1989, 5:00 p.m.: 12 IR 1854; readopted filed Jan 10, 2001, 3:20 p.m.: 24 IR 1477; errata filed Dec 12, 2002, 3:35 p.m.: 26 IR 1571; filed Aug 26, 2004, 11:30 a.m.: 28 IR 98)


SECTION 96. 326 IAC 20-13.1 IS ADDED TO READ AS FOLLOWS:

Rule 13.1. Secondary Lead Smelters


326 IAC 20-13.1-1 Applicability

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 1. (a) This rule applies to the following affected sources at all secondary lead smelters:
(1) Blast, reverberatory, rotary, and electric furnaces.
(2) Refining kettles.
(3) Agglomerating furnaces.
(4) Dryers.
(5) Process fugitive emission sources.
(6) Buildings containing lead bearing materials.
(7) Fugitive dust sources.

(b) This rule does not apply to primary lead smelters, lead refiners, or lead remelters.

(c) The following general provisions of 40 CFR 63, Subpart A* apply to the owner or operator of a secondary lead smelter subject to this rule:
(1) 40 CFR 63.1 through 40 CFR 63.5*.
(2) 40 CFR 63.6(a) through 40 CFR 63.6(c)*.
(3) 40 CFR 63.6(e)(1)(iii)*.
(4) 40 CFR 63.6(g)*.
(5) 40 CFR 63.6(i)* and 40 CFR 63.6(j)*.
(6) 40 CFR 63.7(a) through 40 CFR 63.7(d)*.
(7) 40 CFR 63.7(e)(2) through 40 CFR 63.7(e)(4)*.
(8) 40 CFR 63.7(f) through 40 CFR 63.7(h)*.
(9) 40 CFR 63.8(a)* and 40 CFR 63.8(b)*.
(10) 40 CFR 63.8(c)(1)(ii)*.
(11) 40 CFR 63.8 (c)(2) through 40 CFR 63.8(d)(2)*.
(12) 40 CFR 63.8(d)(3)*, except for a provision concerning the incorporation of the written procedures of a quality control program into the startup, shutdown, or malfunction.
(13) 40 CFR 63.8(e) through 40 CFR 63.8(g)*.
(14) 40 CFR 63.9(a) through 40 CFR 63.9(c)*.
(15) 40 CFR 63.9(e)*.
(16) 40 CFR 63.9(g)*.
(17) 40 CFR 63.9(h)(1) through 40 CFR 63.9(h)(3)*.
(18) 40 CFR 63.9(h)(5)* and 40 CFR 63.9(h)(6)*.
(19) 40 CFR 63.9(i)* and 40 CFR 63.9(j)*.
(20) 40 CFR 63.10(a)*.
(21) 40 CFR 63.10(b)(1)*.
(22) 40 CFR 63.10(b)(2)(iii)*.
(23) 40 CFR 63.10(b)(2)(vi) through 40 CFR 63.10(b)(2)(xiv)*.
(24) 40 CFR 63.10(b)(3)*.
(25) 40 CFR 63.10(c)(1) through 40 CFR 63.10(c)(9)*.
(26) 40 CFR 63.10(c)(12) through 40 CFR 63.10(c)(14)*.
(27) 40 CFR 63.10(d)(1) through 40 CFR 63.10(d)(4)*.
(28) 40 CFR 63.10(e)* and 40 CFR 63.10(f)*.
(29) 40 CFR 63.12 through 40 CFR 63.15*.

(d) The owner or operator of a secondary lead smelter subject to this rule is also subject to Title V permitting requirements under 326 IAC 2-7.

(e) Emission standards in this rule apply at all times.

*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-1)


326 IAC 20-13.1-2 Definitions

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11


Sec. 2. In addition to the definitions in IC 13-11, 326 IAC 1-2, and 326 IAC 20-1-3, the following definitions apply throughout this rule:
(1) "Affected emissions unit" means any of the following emission units at a secondary lead smelter:
(A) Blast, reverberatory, rotary, and electric furnaces.
(B) Refining kettles.
(C) Agglomerating furnaces.
(D) Dryers.
(E) Process fugitive emission sources.
(F) Buildings containing lead-bearing materials.
(G) Fugitive dust sources.
(2) "Affirmative defense" means, in the context of an enforcement proceeding, a response or defense put forward by a defendant, regarding which the defendant has the burden of proof, and the merits of which are independently and objectively evaluated in a judicial or administrative proceeding.
(3) "Agglomerating furnace" means a furnace used to melt flue dust that is collected from a baghouse into a solid mass.
(4) "Bag leak detection system" means an instrument that is capable of monitoring particulate matter loadings in the exhaust of a baghouse in order to detect bag failures. A bag leak detection system includes, but is not limited to, an instrument to monitor relative particulate matter loadings that operates on:
(A) triboelectric;
(B) light scattering; or
(C) transmittance.
(5) "Battery breaking area" means the plant location at which lead-acid batteries are broken, crushed, or disassembled and separated into components.
(6) "Blast furnace" means a smelting furnace consisting of a vertical cylinder atop a crucible, into which lead-bearing charge materials are introduced at the top of the furnace and combustion air is introduced through openings in the refractory lining and shell of the furnace at the bottom of the cylinder and that:
(A) uses coke as a fuel source; and
(B) is operated at a temperature in the combustion zone of greater than nine hundred eighty (980) degrees Celsius so that that lead compounds are chemically reduced to elemental lead metal.
(7) "Blast furnace charging location" means the physical opening through which raw materials are introduced into a blast furnace.
(8) "Collocated blast furnace and reverberatory furnace" means operation at the same location of a blast furnace and a reverberatory furnace where the vent streams of the furnaces are mixed before cooling, with the volumetric flow rate discharged from the blast furnace being equal to or less than that discharged from the reverberatory furnace.
(9) "Dryer" means a chamber that is heated and that is used to remove moisture from lead-bearing materials before they are charged to a smelting furnace.
(10) "Dryer transition equipment" means the junction between a dryer and the charge hopper or conveyor, or the junction between the dryer and the smelting furnace feed chute or hopper located at the ends of the dryer.
(11) "Electric furnace" means a smelting furnace consisting of a vessel into which reverberatory furnace slag is introduced and that uses electrical energy to heat the reverberatory furnace slag to a temperature of greater than nine hundred eighty (980) degrees Celsius so that lead compounds are reduced to elemental lead metal.
(12) "Fugitive dust source" means a stationary source of hazardous air pollutant emissions at a secondary lead smelter that is not associated with a specific process or process fugitive vent or stack. Fugitive dust sources include, but are not limited to, the following:
(A) Roadways.
(B) Storage piles.
(C) Lead-bearing material handling transfer points.
(D) Lead-bearing material transport areas.
(E) Lead-bearing material storage areas.
(F) Other lead-bearing material process areas.
(G) Other lead-bearing material process buildings.
(13) "Furnace and refining/casting area" means any area of a secondary lead smelter where:
(A) smelting furnaces are located;
(B) refining operations occur; or
(C) casting operations occur.
(14) "Lead alloy" means an alloy in which the predominant component is lead.
(15) "Lead-bearing material" means material with a lead content equal to or greater than five (5) milligrams per liter (mg/l) as measured by United States Environmental Protection Agency (U.S. EPA) Method 1311 "Test Methods for Evaluating Solid Waste, Physical/Chemical Method", U.S. EPA Publication SW-846*. Under Method 1311, only materials with at least one hundred (100) parts per million (ppm) lead will be considered to be lead-bearing.
(16) "Leeward wall" means the furthest exterior wall of a total enclosure that is opposite the windward wall.
(17) "Maintenance activity" means any of the following routine maintenance and repair activities that could generate fugitive lead dust:
(A) Replacement or repair of refractory, or any internal or external part of equipment used to process, handle, or control lead-containing materials.
(B) Replacement of any duct section used to convey lead-containing exhaust.
(C) Metal cutting or welding that penetrates the metal structure of any equipment, and its associated components, used to process lead-containing material so that lead dust within the internal structure or its components can become fugitive lead dust.
(D) Resurfacing, repair, or removal of ground, pavement, concrete, or asphalt.
(18) "Materials storage and handling area" means any area of a secondary lead smelter where lead-bearing materials are stored or handled between process steps including, but not limited to areas in which materials are stored in open piles, bins, or tubs, and areas in which material is prepared for charging to a smelting furnace. Lead-bearing materials in these areas include, but are not limited to, the following:
(A) Broken battery components.
(B) Reverberatory furnace slag.
(C) Flue dust.
(D) Dross.
(19) "Natural draft opening" means any permanent opening in an enclosure that:
(A) remains open during operation of a secondary lead smelter; and
(B) is not connected to a duct in which a fan is installed.
(20) "New emissions unit" means any affected emissions unit at a secondary lead smelter that was constructed or reconstructed after May 19, 2011. The term does not include a building that is constructed for the purpose of controlling fugitive emissions from an existing emissions unit.
(21) "Partial enclosure" means a structure comprised of walls or partitions on at least three (3) sides or three-quarters (3/4) of the perimeter surrounding stored materials or process equipment to prevent the entrainment of particulate matter into the air.
(22) "Pavement cleaning" means the use of vacuum equipment, water sprays, or a combination thereof to remove dust or other accumulated material from the paved areas of a secondary lead smelter.
(23) "Plant roadway" means any area of a secondary lead smelter outside of a total enclosure that is subject to vehicle traffic, including traffic by forklifts, front-end loaders, or vehicles carrying whole batteries or cast lead ingots. The term does not include employee and visitor parking areas, provided they are not subject to traffic by vehicles carrying lead-bearing materials.
(24) "Pressurized dryer breaching seal" means a seal system connecting the dryer transition pieces that is maintained at a higher pressure than the inside of the dryer.
(25) "Process fugitive emissions source" means a source of hazardous air pollutant emissions at a secondary lead smelter that is associated with lead smelting or refining, but is not the primary exhaust stream from a smelting furnace, and is not a fugitive dust source. Process fugitive emission sources include, but are not limited to, the following:
(A) Smelting furnace charging points.
(B) Smelting furnace lead and slag taps.
(C) Refining kettles.
(D) Agglomerating furnaces.
(E) Drying kiln transition pieces.
(26) "Process vent" means the following:
(A) Furnace vents.
(B) Dryer vents.
(C) Agglomeration furnace vents.
(D) Vents from battery breakers.
(E) Vents from buildings containing lead-bearing material.
(F) Any ventilation system controlling lead emissions.
(27) "Refining kettle" means an open-top vessel that is constructed of cast iron or steel and is indirectly heated from below and contains molten lead for the purpose of refining and alloying the lead, including the following:
(A) Pot furnaces.
(B) Receiving kettles.
(C) Holding kettles.
(28) "Reverberatory furnace" means a refractory-lined furnace that uses one (1) or more flames to heat the walls and roof of the furnace and lead-bearing scrap to a temperature of greater than nine hundred eighty (980) degrees Celsius so that lead compounds are chemically reduced to elemental lead metal.
(29) "Rotary furnace," or "rotary reverberatory furnace" means a furnace consisting of a refractory-lined chamber that rotates about a horizontal axis and that uses one (1) or more flames to heat the walls of the furnace and lead-bearing scrap to a temperature of greater than nine hundred eighty (980) degrees Celsius so that lead compounds are chemically reduced to elemental lead metal.
(30) "Secondary lead smelter" means any source where lead-bearing scrap material is recycled into elemental lead or lead alloys by smelting, including, but not limited to, lead-acid batteries.
(31) "Shutdown" means the period when no lead-bearing materials are being fed to the furnace and smelting operations have ceased during which the furnace is cooled from steady-state operating temperature to ambient temperature.
(32) "Smelting" means the chemical reduction of lead compounds to elemental lead or lead alloys through processing in high-temperature furnaces at a temperature of greater than nine hundred eighty (980) degrees Celsius, including, but not limited to, the following:
(A) Blast furnaces.
(B) Reverberatory furnaces.
(C) Rotary furnaces.
(D) Electric furnaces.
(33) "Startup" means the period when no lead-bearing materials have been fed to the furnace and smelting operations have not yet commenced during which the furnace is heated from ambient temperature to steady-state operating temperature.
(34) "Total enclosure" means a containment building that is completely enclosed with a floor, walls, and a roof to prevent exposure to the elements and to assure containment of lead-bearing material with limited openings to allow access and egress for people and vehicles. The total enclosure must provide an effective barrier against fugitive dust emissions so that the:
(A) direction of air flow through any openings is inward; and
(B) enclosure is maintained under constant negative pressure.
(35) "Vehicle wash" means a device for removing dust and other accumulated material from the wheels, body, and underside of a vehicle to prevent the inadvertent transfer of lead-contaminated material to another area of a secondary lead smelter or to public roadways.
(36) "Wet suppression" means the use of water, water combined with a chemical surfactant, or a chemical binding agent to prevent the entrainment of dust into the air from fugitive dust sources.
(37) "Windward wall" means the exterior wall of a total enclosure that is most impacted by the wind in its most prevailing direction determined by a wind rose using available data from the closest representative meteorological station.

*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-2)


326 IAC 20-13.1-3 Emission limitations; lead standards for Exide Technologies, Inc.

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 3. (a) Exide Technologies, Inc., shall comply with the following lead emission limitations and operating provisions:
Emission Unit  Emission Limitation mg/dscm 
Ventilation baghouse  0.5 
Refinery baghouse  0.5 
Bin room baghouse  0.5 
North scrubber  1.0 
South scrubber  1.0 
Battery breaker scrubber  0.5 

(b) New emission units not described in subsection (a) shall comply with the emission limitations under section 5(c) of this rule, except the requirement for HEPA filters shall not apply if the new or reconstructed sources are vented to control devices operating prior to December 1, 2000.

(c) Exide Technologies, Inc., shall comply with the following requirements by October 1, 2013:
(1) Section 1 of this rule.
(2) Section 2 of this rule.
(3) This section.
(4) Section 5(b), 5(c), and 5(h) of this rule.
(5) Sections 7 through 9 of this rule.
(6) Section 10 of this rule.
(7) Section 11(a) through 11(e) of this rule.
(8) Section 12(a) through 12(c) and 12(f) of this rule.
(9) Section 13(a) of this rule.
(10) Section 15(a), 15(b), 15(c)(1) through 15(c)(8), 15(c)(10) through 15(c)(13), 15(c)(15) through 15(c)(17), 15(d), 15(e)(1), 15(e)(4) through 15(e)(7), and 15(e)(9) through 15(e)(12) of this rule.
(Air Pollution Control Board; 326 IAC 20-13.1-3)


326 IAC 20-13.1-4 Emission limitations; lead standards for Quemetco, Inc.

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 4. (a) Quemetco, Inc., shall comply with the following lead emission limitations and operating provisions:
Emission Unit  Emission Limitation mg/dscm 
Stack 100  1.0 
Stack 101  0.5 
Stack 102  0.5 
Stack 103  0.5 
Stack 104  0.5 
Stack 105  0.5 
Stack 106  0.5 
Stack 107  0.5 
Stack 108  0.5 
Stack 109  0.5 
Stack 111  1.0 
Process fugitive and fugitive dust emissions from stacks 101 through 111 shall be vented to the atmosphere through HEPA filters that have been certified by the manufacturer to remove ninety-nine and ninety-seven hundredths percent (99.97%) of all particles three-tenths (0.3) micrometers and larger.

(b) New emission units not described in subsection (a) shall comply with the emission limitations under section 5(c) of this rule.
(Air Pollution Control Board; 326 IAC 20-13.1-4)


326 IAC 20-13.1-5 Emission limitations and operating provisions

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 5. (a) The owner or operator of a secondary lead smelter not described in section 3 or 4 of this rule shall maintain the following concentrations of lead compounds for existing sources:
(1) From any process vent, at or below one (1.0) milligram of lead per dry standard cubic meter (forty-three hundred-thousandths (0.00043) grains of lead per dry standard cubic foot).
(2) From any process fugitive emission source, at or below five-tenths (0.5) milligram of lead per dry standard cubic meter (twenty-two hundred-thousandths (0.00022) grains of lead per dry standard cubic foot).
(3) From vents venting fugitive dust sources, at or below five-tenths (0.5) milligram of lead per dry standard cubic meter (twenty-two hundred-thousandths (0.00022) grains of lead per dry standard cubic foot).

(b) The owner or operator of a secondary lead smelter shall comply with the following lead emission limitations and operating provisions for existing sources:
(1) The owner or operator of a secondary lead smelter shall maintain the flow-weighted average concentration of lead compounds in vent gases from a secondary lead smelter at or below two-tenths (0.2) milligrams per dry standard cubic meter (eighty-seven millionths (0.000087) grains of lead per dry standard cubic foot).
(2) The owner or operator of a secondary lead smelter shall demonstrate compliance with the flow-weighted average emissions limit on a twelve (12) month rolling average basis, calculated monthly using the most recent test data available.
(3) Until twelve (12) monthly weighted average emission rates have been accumulated, the owner or operator of a secondary lead smelter shall calculate only the monthly average weighted emissions rate.
(4) The owner of operator of a secondary lead smelter shall use the following equation to calculate the flow-weighted average concentration of lead compounds from process vents:
326110774SNA01.jpg
Where:  CFWA  =  Flow-weighted average concentration of all process vents. 
  n  =  Number of process vents. 
  Fi  =  Flow rate from process vent i in dry standard cubic feet per minute, as measured during the most recent compliance test. 
  Ci  =  Concentration of lead in process vent i, as measured during the most recent compliance test. 
(5) Each month, the owner or operator of a secondary lead smelter shall use the concentration of lead and flow rate obtained during the most recent compliance test performed prior to or during that month to perform the calculation using the equation in subdivision (4).
(6) If a continuous emissions monitoring system (CEMS) is used to measure the concentration of lead in a vent, the monthly average lead concentration and monthly average flow rate must be used rather than the most recent compliance test data.

(c) For new emission units that are constructed or reconstructed after May 19, 2011, the owner or operator of a secondary lead smelter shall maintain the concentration of lead compounds in any process vent gas at or below two-tenths (0.2) milligrams of lead per dry standard cubic meter (eighty-seven millionths (0.000087) grains of lead per dry standard cubic foot).

(d) The owner or operator of a secondary lead smelter shall meet the applicable emission limits for total hydrocarbons and dioxins and furans from furnace sources specified in the following table. There are no standards for dioxins and furans during periods of startup and shutdown.
Emission Unit  Total Hydrocarbon (Parts per million by volume expressed as propane corrected to four percent (4%) carbon dioxide)  Dioxin and Furan (nanograms per dry standard cubic meter expressed as toxic equivalency quotient (TEQ) corrected to seven percent (7%) oxygen) 
Collocated blast furnace and reverberatory furnace (new and existing)  20  0.50 
Collocated blast furnace and reverberatory furnace when the reverberatory furnace is not operating for units that commence construction or reconstruction before June 9, 1994  360  170 
Collocated blast furnace and reverberatory furnace when the reverberatory furnace is not operating for units that commence construction or reconstruction after June 9, 1994  70  170 
Blast furnaces that commence construction or reconstruction before June 9, 1994  360  170 
Blast furnaces that commence construction or reconstruction after June 9, 1994  70  170 
Blast furnaces that commence construction or reconstruction after May 19, 2011  70  10 
Reverberatory and electric furnaces that commence construction or reconstruction before May 19, 2011  12  0.20 
Reverberatory and electric furnaces that commence construction or reconstruction after May 19, 2011  12  0.10 

(e) If the owner or operator of a secondary lead smelter combines furnace emissions from multiple types of furnaces and these furnaces do not meet the definition of collocated blast furnace and reverberatory furnace, the owner or operator of a secondary lead smelter shall calculate the emissions limit for the combined furnace stream using the following equation:
326110774SNA02.jpg
Where:  CEL  =  Flow-weighted average emissions limit (concentration) of combined furnace vents. 
  n  =  Number of furnace vents. 
  Fi  =  Flow rate from furnace vent i in dry standard cubic feet per minute. 
  CELi  =  Emissions limit (concentration) of pollutant in furnace vent i, as specified in subsection (d). 

(f) If the owner or operator of a secondary lead smelter combines furnace emissions with the furnace charging process fugitive emissions and discharges them to the atmosphere through a common emissions point, the owner or operator of a secondary lead smelter shall demonstrate compliance with the applicable total hydrocarbons concentration limit specified in subsection (d) at a location downstream from the point at which the two (2) emission streams are combined.

(g) If the owner or operator of a secondary lead smelter does not combine the furnace charging process fugitive emissions with the furnace process emissions, and discharges the emissions to the atmosphere through separate emission points, the owner or operator of a secondary lead smelter shall maintain the total hydrocarbons concentration in the exhaust gas at or below twenty (20) parts per million by volume, expressed as propane and corrected to four percent (4%) carbon dioxide.

(h) At all times, the owner or operator of a secondary lead smelter shall operate and maintain any affected emission unit, including associated air pollution control equipment and monitoring equipment, in a manner consistent with safety and good air pollution control practices for minimizing emissions. Determination of whether appropriate operation and maintenance procedures are being used will be based on information available to the department that may include, but is not limited to, the following:
(1) Monitoring results.
(2) Review of operation and maintenance procedures.
(3) Review of operation and maintenance records.
(4) Inspection of the source.

(i) If the owner or operator of a secondary lead smelter owns or operates a unit subject to emission limits in subsection (d), the owner or operator of a secondary lead smelter shall minimize the unit's startup and shutdown periods following the manufacturer's recommended procedures, if available. The owner or operator of a secondary lead smelter shall develop and follow standard operating procedures designed to minimize emissions of total hydrocarbons for each startup or shutdown scenario anticipated. The owner or operator of a secondary lead smelter shall submit a signed statement in the Notification of Compliance Status report that indicates that the owner or operator of a secondary lead smelter conducted startups and shutdowns according to the manufacturer's recommended procedures, if available, and the standard operating procedures designed to minimize emissions of total hydrocarbons.

(j) In addition to complying with the applicable emission limits for dioxins and furans listed in subsection (d), the owner or operator of a secondary lead smelter shall operate a process to separate plastic battery casing materials from all automotive batteries prior to introducing feed into a furnace.
(Air Pollution Control Board; 326 IAC 20-13.1-5)


326 IAC 20-13.1-6 Compliance dates

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 6. The owner or operator of a secondary lead smelter not described in section 3 of this rule shall comply with the requirements of this rule by the following dates:
(1) For affected emission units constructed or reconstructed on or before May 19, 2011, the owner or operator of a secondary lead smelter shall demonstrate compliance with the requirements of this rule no later than January 6, 2014.
(2) For affected emission units constructed or reconstructed after May 19, 2011, the owner or operator of a secondary lead smelter shall demonstrate compliance with the requirements of this rule by January 5, 2012, or upon startup of operations, whichever is later.
(Air Pollution Control Board; 326 IAC 20-13.1-6)


326 IAC 20-13.1-7 Total enclosure standards

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 7. (a) The owner or operator of a secondary lead smelter shall operate the following process fugitive emission sources and fugitive dust sources in a total enclosure that is maintained at negative pressure at all times and vented to a control device designed to capture lead particulate:
(1) Smelting furnaces.
(2) Smelting furnace charging areas.
(3) Lead taps, slag taps, and molds during tapping.
(4) Battery breakers.
(5) Refining kettles, casting areas.
(6) Dryers.
(7) Agglomerating furnaces and agglomerating furnace product taps.
(8) Material handling areas for any lead-bearing materials except those listed in subsection (b).
(9) Areas where dust from fabric filters, sweepings, or used fabric filters are processed.

(b) The owner or operator of a secondary lead smelter is not required to maintain a total enclosure in the following areas unless the area is in a total enclosure described in subsection (a):
(1) Lead ingot product handling areas.
(2) Stormwater and wastewater treatment areas.
(3) Intact battery storage areas.
(4) Areas where lead-bearing material is stored in closed containers or enclosed mechanical conveyors.
(5) Areas where clean battery casing material is handled.

(c) The owner or operator of a secondary lead smelter shall do the following:
(1) Construct and operate a total enclosure for the process fugitive emission sources and fugitive dust sources listed in subsection (a) that is free of cracks, gaps, corrosion, or other deterioration that could allow lead-bearing material to be released from the primary barrier.
(2) Put measures in place to prevent the tracking of lead-bearing material out of the unit by personnel or by equipment used in handling the material.
(3) Designate an area to decontaminate equipment and collect and properly manage any rinsate.
(4) Ventilate the total enclosure for the process fugitive emission sources and fugitive dust sources listed in subsection (a) continuously to ensure negative pressure values of at least thirteen-thousandths (0.013) millimeters of mercury (seven-thousandths (0.007) inches of water).
(5) Maintain an inward flow of air through all natural draft openings of the total enclosure.
(6) Inspect enclosures and structures that contain any lead-bearing material at least once per month.
(7) Repair any gaps, breaks, separations, leak points, or other possible routes for emissions of lead to the atmosphere within one (1) week of identification unless the owner or operator of a secondary lead smelter receives approval for an extension from the department and U.S. EPA before the repair period is exceeded.
(Air Pollution Control Board; 326 IAC 20-13.1-7)


326 IAC 20-13.1-8 Total enclosure monitoring requirements

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 8. (a) In addition to the requirements referenced in section 1(c) of this rule, and the requirements of section 7 of this rule, the owner or operator of a secondary lead smelter shall do the following:
(1) Submit a monitoring system plan describing the installation and operation of a continuous monitoring system that meets the requirements of subdivisions (2) and (3). The plan shall be postmarked or hand delivered to the department one hundred twenty (120) days prior to installation of the continuous monitoring system.
(2) The owner or operator of a secondary lead smelter shall install, operate, and maintain a minimum of one (1) building digital differential pressure monitoring system to continuously monitor each total enclosure at each of the following three (3) walls in each total enclosure that has a total ground surface area of ten thousand (10,000) square feet or more:
(A) The leeward wall.
(B) The windward wall.
(C) An exterior wall that connects the leeward and windward wall at a location defined by the intersection of a perpendicular line between a point on the connecting wall and a point on its furthest opposite exterior wall, and intersecting within plus or minus ten (10) meters of the midpoint of a straight line between the two (2) other monitors specified. The midpoint monitor must not be located on the same wall as either of the other two (2) monitors.
(3) The owner or operator of a secondary lead smelter shall install and maintain a minimum of one (1) building digital differential pressure monitoring system at the leeward wall of each total enclosure that has a total ground surface area of less than ten thousand (10,000) square feet.

(b) Within one hundred eighty (180) days after written approval of the continuous monitoring system plan by the department, the owner or operator of a secondary lead smelter shall install and operate a continuous monitoring system that consists of the following:
(1) A digital differential pressure sensor capable of measuring pressure within a range of one-hundredth (0.01) to two-tenths (0.2) millimeters mercury (five-thousandths (0.005) to eleven-hundredths (0.11) inches of water) with a minimum accuracy of plus or minus one-thousandth (0.001) millimeters of mercury (five ten-thousandths (0.0005) inches of water).
(2) A processor.
(3) An alarm.
(4) A continuous recording device.

(c) The owner or operator of a secondary lead smelter shall calibrate each digital differential pressure monitoring system in accordance with the manufacturer's specifications at least once every twelve (12) calendar months or more frequently if recommended by the manufacturer.

(d) The owner or operator of a secondary lead smelter shall obtain prior written approval from the department for any changes to the location or operation of the continuous monitoring system.

(e) The owner or operator of a secondary lead smelter shall initiate corrective actions within thirty (30) minutes of a monitoring system alarm.

(f) The owner or operator of a secondary lead smelter shall notify the department within seven (7) days of any physical changes to the total enclosure including, but not limited to, ventilation capacity and building size.

(g) The owner or operator of a secondary lead smelter shall maintain the following on site for a period of three (3) years and have available the following records for an additional two (2) years:
(1) Records of the pressure differential.
(2) Logs of monitoring system alarms, including date and time.
(3) Logs of corrective actions, including date and time.

*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-8)


326 IAC 20-13.1-9 Fugitive dust source standards

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 9. (a) The owner or operator of a secondary lead smelter shall prepare and at all times operate in accordance with a standard operating procedures manual that describes in detail the measures that will be put in place and implemented to control the fugitive dust emissions from the following sources:
(1) Plant roadways.
(2) Plant buildings.
(3) Accidental releases.
(4) Battery storage area.
(5) Equipment maintenance.
(6) Material storage areas.
(7) Material handling areas.

(b) The owner or operator of a secondary lead smelter shall submit the standard operating procedures manual to the department for review and approval when initially developed and any time changes are made.

(c) The controls specified in the standard operating procedures manual must, at a minimum, include the following requirements:
(1) Where a cleaning practice is specified, the owner or operator of a secondary lead smelter shall clean by wet wash or a vacuum equipped with a filter rated by the manufacturer to achieve ninety-nine and ninety-seven hundredths percent (99.97%) capture efficiency for three-tenths (0.3) micron particles in a manner that does not generate fugitive lead dust.
(2) The owner or operator of a secondary lead smelter shall pave all areas subject to vehicle traffic and shall clean the pavement twice per day, except on days when natural precipitation makes cleaning unnecessary or when sand or a similar material has been spread on plant roadways to provide traction on ice or snow. Limited access and limited use roadways such as unpaved roads to remote locations on the property may be exempt from this requirement if they are used no more than one (1) round trip per day.
(3) The owner or operator of a secondary lead smelter shall initiate cleaning of all affected areas within one (1) hour after detection of any accidental release of lead dust that exceeds ten (10) pounds in accordance with the reportable quantity requirements for lead at 40 CFR 302.4*.
(4) The owner or operator of a secondary lead smelter shall inspect any batteries that are not stored in a total enclosure once each week and move any broken batteries to an enclosure within seventy-two (72) hours of identification. The owner or operator of a secondary lead smelter shall clean residue from broken batteries within seventy-two (72) hours of identification.
(5) The owner or operator of a secondary lead smelter shall wash each vehicle at each exit of the material storage and handling areas. The vehicle wash shall include washing of tires, undercarriage, and exterior surface of the vehicle followed by vehicle inspection.
(6) The owner or operator of a secondary lead smelter shall perform all maintenance activities that could generate lead dust in a manner that minimizes emissions of fugitive dust. This shall include one (1) or more of the following:
(A) Performing maintenance inside a total enclosure maintained at negative pressure.
(B) Performing maintenance inside a temporary enclosure and use of a vacuum system either equipped with a filter rated by the manufacturer to achieve a capture efficiency of ninety-nine and ninety-seven hundredths percent (99.97%) for three-tenths (0.3) micron particles or routed to an existing control device permitted for this activity.
(C) Performing maintenance inside a partial enclosure and use of wet suppression sufficient to prevent dust formation.
(D) Decontamination of equipment prior to removal from an enclosure.
(E) Immediate repair of ductwork or structure leaks without an enclosure if the time to construct a temporary enclosure would exceed the time to make a temporary or permanent repair, or if construction of an enclosure would cause a higher level of emissions than if an enclosure were not constructed.
(F) Activities required for inspection of fabric filters and maintenance of filters that are in need of removal and replacement are not required to be conducted inside of total enclosures. Used fabric filters shall be placed in sealed plastic bags or containers prior to removal from a baghouse.
(7) The owner or operator of a secondary lead smelter shall collect and transport all lead-bearing dust within closed conveyor systems or in sealed, leak-proof containers unless the collection and transport activities are contained within a total enclosure. All other lead-bearing material must be contained and covered for transport outside of a total enclosure in a manner that prevents spillage or dust formation. Intact batteries and lead ingot product are exempt from the requirement to be covered for transport.

(d) The standard operating procedures manual must specify that records be maintained of all pavement cleaning, vehicle washing, and battery storage inspection activities performed to control fugitive dust emissions.

(e) The owner or operator of a secondary lead smelter shall pave all grounds or plant ground cover sufficient to prevent wind-blown dust. The owner or operator of a secondary lead smelter may use dust suppressants on unpaved areas that will not support a ground cover, such as roadway shoulders, steep slopes, limited access and limited use roadways.

(f) As provided in 40 CFR 63.6(g)*, as an alternative to the requirements specified in this section, the owner or operator of a secondary lead smelter can demonstrate to the department that an alternative measure is equivalent or more protective of the environment than a practice described in this section.

*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-9)


326 IAC 20-13.1-10 Bag leak detection system requirements

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 10. (a) The owner or operator of a secondary lead smelter shall install and continuously operate a bag leak detection system for all baghouses controlling process vents and process fugitive sources unless a system meeting the requirements of section 11(h) of this rule for a CEMS is installed for monitoring the concentration of lead. Baghouses equipped with HEPA filters or baghouses followed by wet electrostatic precipitators used as secondary control devices are exempt from this requirement. The owner or operator shall maintain and operate each baghouse controlling process vents and process fugitive sources to meet the following conditions:
(1) The alarm on the system does not activate for more than five percent (5%) of the total operating time in a six (6) month reporting period.
(2) The owner or operator of a secondary lead smelter shall include a corrective action plan in its standard operating procedures manual required in subsection (c) that specifies the procedures that will be used to determine and record the time and cause of the alarm in addition to necessary corrective actions taken to minimize emissions as follows:
(A) The procedures used to determine the cause of the alarm shall be initiated within thirty (30) minutes of the alarm.
(B) Procedures to determine and correct the cause of the alarm may include, but are not limited to, the following standard operating procedures:
(i) Inspecting the baghouse for air leaks, torn or broken filter elements, or any other malfunction that may cause an increase in emissions.
(ii) Sealing off defective bags or filter media.
(iii) Replacing defective bags or filter media, or otherwise repairing the control device.
(iv) Sealing off a defective baghouse compartment.
(v) Cleaning the bag leak detection system probe, or otherwise repairing the bag leak detection system.
(vi) Shutting down the process producing the particulate emissions.

(b) The owner or operator of a secondary lead smelter shall demonstrate compliance with the bag leak detection system requirements by submitting reports showing that the alarm on the system does not activate for more than five percent (5%) of the total operating time in a six (6) month period or two hundred nineteen (219) hours, if operated for four thousand three hundred eighty (4,380) hours in the six (6) month period, whichever is less. The owner or operator of a secondary lead smelter shall calculate the percentage of total operating time the alarm on the bag leak detection system activates as follows:
(1) Count the actual time it takes the owner or operator of a secondary lead smelter to identify and correct the cause of the alarm, except for:
(A) any time that the process is shut down for repair;
(B) alarms that occur due solely to a malfunction of the bag leak detection system; and
(C) alarms that occur during startup, shutdown, and malfunction if the:
(i) condition is described in the startup, shutdown, and malfunction plan; and
(ii) owner or operator of a secondary lead smelter follows all the procedures in the plan defined for this condition.
(2) Calculate the percentage of time the alarm on the bag leak detection system activates as the ratio of the sum of alarm times to the total operating time multiplied by one hundred (100).

(c) The owner or operator of a secondary lead smelter shall prepare and at all times operate in accordance with a standard operating procedures manual that describes in detail procedures for inspection, maintenance, and bag leak detection, and corrective action plans for all baghouses (fabric filters or cartridge filters) that are used to control process vents, process fugitive, or fugitive dust emissions from any source subject to the lead emission standards in sections 3, 4, 5, 7, and 9 of this rule, including those used to control emissions from building ventilation.

(d) The owner or operator of a secondary lead smelter shall submit the standard operating procedures manual for baghouses required by subsection (c) to the department for review and approval.

(e) The procedures that the owner or operator of a secondary lead smelter specifies in the standard operating procedures manual for inspections and routine maintenance must, at a minimum, include the following requirements:
(1) Daily monitoring of pressure drop across each baghouse cell.
(2) Weekly confirmation that dust is being removed from hoppers through visual inspection, or equivalent means of ensuring the proper functioning of removal mechanisms.
(3) Daily check of compressed air supply for pulse-jet baghouses.
(4) An appropriate methodology for monitoring cleaning cycles to ensure proper operation.
(5) Monthly check of bag cleaning mechanisms for proper functioning through visual inspection or equivalent means.
(6) Monthly check of bag tension on reverse air and shaker-type baghouses. The checks are not required for shaker-type baghouses using self-tensioning or spring loaded devices.
(7) Quarterly confirmation of the physical integrity of the baghouse through visual inspection of the baghouse interior for air leaks.
(8) Quarterly inspection of fans for wear, material buildup, and corrosion through visual inspection, vibration detectors, or equivalent means.
(9) Except as provided in subsection (a), continuous operation of a bag leak detection system, unless a system meeting the requirements of section 11(h) of this rule for a CEMS is installed for monitoring the concentration of lead.

(f) The procedures specified in the standard operating procedures manual for baghouse maintenance shall include, at a minimum, a preventative maintenance schedule that is consistent with the baghouse manufacturer's instructions for routine and long-term maintenance.

(g) The owner or operator of a secondary lead smelter shall operate a bag leak detection system that meets the following requirements:
(1) The bag leak detection system must be certified by the manufacturer to be capable of detecting particulate matter emissions at concentrations of one (1) milligram per actual cubic meter (forty-four hundred-thousandths (0.00044) grains per actual cubic foot) or less.
(2) The bag leak detection system sensor must provide output of relative particulate matter loadings, and the owner or operator of a secondary lead smelter shall continuously record the output from the bag leak detection system.
(3) The bag leak detection system must be equipped with an alarm system that will alert appropriate plant personnel when an increase in relative particulate loadings is detected over a preset level. The alarm must be located where it can be heard by the appropriate plant personnel.
(4) Each bag leak detection system must be installed, calibrated, operated, and maintained consistent with the U.S. EPA guidance document "Fabric Filter Bag Leak Detection Guidance" (EPA-454/R-98-015, September 1997)* and with the manufacturer's written specifications and recommendations.
(5) The initial adjustment of the system must, at a minimum, consist of establishing the following:
(A) The baseline output by adjusting the sensitivity (range).
(B) The averaging period of the device.
(C) The alarm set points.
(D) The alarm delay time.
(6) Following initial adjustment and except as detailed in the standard operating procedures and maintenance plan required under subsection (e), the owner or operator of a secondary lead smelter shall not adjust the system's:
(A) sensitivity or range;
(B) averaging period;
(C) alarm set points; or
(D) alarm delay time.
The owner or operator of a secondary lead smelter shall not increase the sensitivity of the system by more than one hundred percent (100%) or decrease the sensitivity by more than fifty percent (50%) over a three hundred sixty-five (365) day period unless the adjustment follows a complete baghouse inspection that demonstrates that the baghouse is in good operating condition.
(7) For negative pressure, induced air baghouses, and positive pressure baghouses that are discharged to the atmosphere through a stack, the owner or operator of a secondary lead smelter shall install the bag leak detector downstream of the baghouse and upstream of any wet acid gas scrubber.
(8) Where multiple detectors are required, the system's instrumentation and alarm may be shared among detectors.

(h) In addition to the record keeping and reporting requirements under section 15 of this rule, the owner or operator of a secondary lead smelter shall comply with the following:
(1) Submit a report within thirty (30) days after the end of each preceding six (6) month period ending June 30 and December 31 of each year that includes the following:
(A) A description of the actions taken following each bag leak detection system alarm pursuant to subsection (a).
(B) Calculations of the percentage of total operating time, or the total operating time in hours and minutes the alarm on the bag leak detection system was activated during the reporting period.
(2) Records for bag leak detection systems shall be maintained on site for a period of three (3) years and be available for an additional two (2) years and shall include the following information:
(A) Records of bag leak detection system output.
(B) Identification of the date and time of all bag leak detection system alarms.
(C) The time that procedures to determine the cause of the alarm were initiated.
(D) The cause of the alarm.
(E) An explanation of the corrective actions taken.
(F) The date and time the cause of the alarm was corrected.
(G) Records of total operating time of an affected source during smelting operations for each six (6) month period.

*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-10)


326 IAC 20-13.1-11 Other requirements

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 11. (a) The owner or operator of a secondary lead smelter shall comply with the following opacity limitations:
(1) Stacks exhausting process vents, process fugitive emissions, or fugitive dust emissions shall not exceed five percent (5%) opacity from particulate matter emissions for any one (1) six (6) minute averaging period as measured by 40 CFR 60, Appendix A, Method 9*.
(2) Exterior dust handling systems of dry collectors of lead emitting processes, such as augers, hoppers, and transfer points, shall not discharge to the atmosphere visible emissions in excess of five percent (5%) of an observation period consisting of three (3) twenty (20) minute periods, as determined by 40 CFR 60, Appendix A, Method 22*. The provisions under this subdivision for dust handling systems shall not apply during maintenance and repair of the dust handling systems. During maintenance and repair of the dust handling system, the owner or operator shall take reasonable measures to prevent or minimize fugitive dust emissions.
(3) The opacity limitations in this subsection shall only apply to particulate matter emissions.

(b) The owner or operator of a secondary lead smelter shall install and maintain an ambient air quality monitoring network for lead as follows:
(1) Unless the owner or operator of a secondary lead smelter has received approval prior to December 1, 2000, to operate an ambient air quality monitoring network, the owner or operator of a secondary lead smelter shall submit a proposed ambient monitoring and quality assurance plan to the department within ninety (90) days after December 1, 2000. The plan does not need to be submitted by the owner or operator of a secondary lead smelter if an authorized air pollution control agency operates the monitoring network. The owner or operator of a secondary lead smelter may submit a plan for an existing monitoring network that predates December 1, 2000.
(2) An owner or operator of a secondary lead smelter that has not received approval prior to the effective date of this rule shall commence ambient monitoring within thirty (30) days after the department's approval of the proposed ambient monitoring and quality assurance plan. An owner or operator of a secondary lead smelter that has received approval prior to the effective date of this rule shall commence monitoring under this rule within thirty (30) days of the date approval was received.
(3) The ambient monitoring shall be performed:
(A) using U.S. EPA-approved methods, procedures, and quality assurance programs, and in accordance with the ambient monitoring and quality assurance plan as approved by the department; or
(B) by an authorized air pollution control agency having jurisdiction to operate the network.
(4) The owner or operator of a secondary lead smelter shall submit a quarterly report to the department within forty-five (45) days after the end of the quarter in which the data was collected. The report shall include the following:
(A) Ambient air quality monitoring network data.
(B) If a violation of the NAAQS for lead occurred, identification of the cause of the violation and corrective actions taken to address the violation.
(5) After twenty-four (24) months from the commencement date of monitoring in accordance with the approved monitoring plan, an owner or operator of a secondary lead smelter may submit a request to discontinue ambient monitoring. The commissioner may deny the request if a determination is made that continued monitoring is in the interest of public health and the environment.

(c) Ventilation air from the following shall be conveyed or ventilated to a control device:
(1) All enclosure hoods and total enclosures.
(2) All dryer emission vents.
(3) Agglomerating furnace emission vents.

(d) If the owner or operator of a secondary lead smelter uses baghouses equipped with HEPA filters as a secondary filter used to control emissions from any source subject to the lead emission standards in sections 3 through 5 of this rule, the owner or operator of secondary lead smelter must monitor and record the pressure drop across each HEPA filter system daily.
(1) If the pressure drop is outside the limit specified by the filter manufacturer, the owner or operator of a secondary lead smelter shall take the appropriate corrective measures, including, but not limited to, the following:
(A) Inspecting the filter and filter housing for air leaks and torn or broken filters.
(B) Replacing defective filter media, or otherwise repairing the control device.
(C) Sealing off a defective control device by routing air to other control devices.
(D) Shutting down the process producing the particulate emissions.
(2) The owner or operator of a secondary lead smelter shall maintain purchasing records and manufacturer's specifications of any HEPA filters installed on process fugitive and fugitive dust stacks demonstrating the filters have been certified by the manufacturer to remove ninety-nine and ninety-seven hundredths percent (99.97%) of all particles three-tenths (0.3) micrometers and larger. The records and manufacturer's specifications shall be:
(A) maintained on site for three (3) years; and
(B) available for an additional two (2) years.

(e) If the owner or operator of a secondary lead smelter uses a wet scrubber to control particulate matter and metal hazardous air pollutant emissions from a process vent to demonstrate continuous compliance with the emission standards, the owner or operator of a secondary lead smelter must monitor and record the pressure drop and water flow rate of the wet scrubber during the initial performance or compliance test conducted to demonstrate compliance with the applicable lead emission limits under sections 3 through 5 of this rule. Thereafter, the owner or operator of a secondary lead smelter shall:
(1) monitor and record the pressure drop and water flow rate values at least once every hour; and
(2) maintain the pressure drop and water flow rate at levels no lower than thirty percent (30%) below the pressure drop and water flow rate measured during the initial performance or compliance test.

(f) The owner or operator of a secondary lead smelter shall comply with the following requirements to demonstrate continuous compliance with the total hydrocarbon and dioxin and furan emission standards. During periods of startup and shutdown, the requirements of subdivision (4) do not apply. Instead, the owner or operator of a secondary lead smelter shall demonstrate compliance with the standard for total hydrocarbon by meeting the requirements of section 5(i) of this rule.
(1) The owner or operator of a secondary lead smelter shall install, calibrate, maintain, and continuously operate a device to monitor and record the temperature of the afterburner or furnace exhaust streams consistent with the requirements for continuous monitoring systems in 40 CFR 63.8*.
(2) Prior to or in conjunction with the initial performance or compliance test to determine compliance with section 5(d) of this rule, the owner or operator of a secondary lead smelter shall conduct a performance evaluation for the temperature monitoring device according to 40 CFR 63.8(e)*. The definitions, installation specifications, test procedures, and data reduction procedures for determining calibration drift, relative accuracy, and reporting described in Performance Specification 2, 40 CFR 60, Appendix B, sections 2*, 3*, 5*, 7*, 8*, 9*, and 10* must be used to conduct the evaluation. The temperature monitoring device must meet the following performance and equipment specifications:
(A) The recorder response range must include zero (0) and one and one-half (1.5) times the average temperature identified in subdivision (3).
(B) The monitoring system calibration drift must not exceed two percent (2%) of one and one-half (1.5) times the average temperature identified in subdivision (3).
(C) The monitoring system relative accuracy must not exceed twenty percent (20%).
(D) The reference method must be a National Institute of Standards and Technology calibrated reference thermocouple-potentiometer system or an alternate reference method, subject to the approval of U.S. EPA.
(3) The owner or operator of a secondary lead smelter shall monitor and record the temperature of the afterburner or the furnace exhaust streams every fifteen (15) minutes during the initial performance or compliance test for total hydrocarbons and dioxins and furans and determine an arithmetic average for the recorded temperature measurements.
(4) To demonstrate continuous compliance with the standards for total hydrocarbons and dioxins and furans, the owner or operator of a secondary lead smelter shall maintain an afterburner or exhaust temperature so that the average temperature in any three (3) hour period does not fall more than twenty-eight (28) degrees Celsius below the average established in subdivision (3).

(g) In accordance with subdivision (1), (2), or (3), the owner or operator of a new or reconstructed emission unit subject to the requirements under sections 3 through 5 of this rule shall install, calibrate, maintain, and operate a CEMS for measuring lead emissions. In addition to the requirements for CEMS in 40 CFR 63.8(c) that are referenced in section 1(c) of this rule, the owner or operator of a secondary lead smelter shall comply with the requirements for CEMS specified in subsection (h).
(1) The owner or operator of a new or reconstructed emission unit subject to the emission limits for lead compounds under sections 3 through 5 of this rule shall install a CEMS for measuring lead emissions within one hundred eighty (180) days of promulgation by U.S. EPA of performance specifications for lead CEMS.
(2) Prior to one hundred eighty (180) days after U.S. EPA promulgates performance specifications for CEMS used to measure lead concentrations, the owner or operator of a secondary lead smelter shall use the procedure described in section 12(a)(1) of this rule to determine compliance.
(3) Vents from control devices that serve only to control emissions from buildings containing lead-bearing materials are exempt from the requirement to install a CEMS for measuring lead emissions.

(h) If a CEMS is used to measure lead emissions, the owner or operator of a secondary lead smelter shall install a CEMS with a sensor in a location that provides representative measurement of the exhaust gas flow rate at the sampling location of the CEMS used to measure lead emissions, taking into account the manufacturer's recommendations. The flow rate sensor is that portion of the system that senses the volumetric flow rate and generates an output proportional to that flow rate.
(1) The CEMS shall be designed to measure the exhaust gas flow rate over a range that extends from a value of at least twenty percent (20%) less than the lowest expected exhaust flow rate to a value of at least twenty percent (20%) greater than the highest expected exhaust gas flow rate.
(2) The CEMS shall be equipped with a data acquisition and recording system that is capable of recording values over the entire range specified in subdivision (1).
(3) The owner or operator of a secondary lead smelter shall perform an initial relative accuracy test of the CEMS in accordance with the applicable performance specification in 40 CFR 60, Appendix B*.
(4) The owner or operator of a secondary lead smelter shall operate the CEMS and record data during all periods of operation of the affected facility including periods of startup, shutdown, and malfunction, except for periods of monitoring system malfunctions, repairs associated with monitoring system malfunctions, and required monitoring system quality assurance or quality control activities including, as applicable, calibration checks and required zero and span adjustments.
(5) If the owner or operator of a secondary lead smelter uses a CEMS to measure lead emissions, the owner or operator of a secondary lead smelter shall calculate the average lead concentration and flow rate monthly to determine compliance with sections 3 through 5 of this rule.
(6) When the CEMS is unable to provide quality assured data, the following apply:
(A) When data are not available for periods of up to forty-eight (48) hours, the highest recorded hourly emissions rate from the previous twenty-four (24) hours shall be used.
(B) When data are not available for forty-eight (48) or more hours, the maximum daily emissions rate based on the previous thirty (30) days shall be used.

*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-11)


326 IAC 20-13.1-12 Compliance testing

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 12. (a) Following the initial performance or compliance test to demonstrate compliance with the lead emission limits specified in sections 3 through 5 of this rule, the owner or operator of a secondary lead smelter shall conduct performance tests for lead compounds in accordance with the following schedule:
(1) Conduct an annual performance test for lead compounds from each process vent, no later than twelve (12) calendar months following the previous compliance test, unless the owner or operator of a secondary lead smelter installs and operates a CEMS meeting the requirements of 40 CFR 63.8*.
(2) If an annual compliance test demonstrates that a process vent emitted lead compounds at one-tenth (0.1) milligram of lead per dry standard cubic meter or less during the time of the annual compliance test, the owner or operator of a secondary lead smelter may submit a written request to the U.S. EPA applying for an extension of up to twenty-four (24) calendar months from the previous compliance test to conduct the next compliance test for lead compounds.

(b) The owner or operator of a secondary lead smelter that vents fugitive dust shall:
(1) conduct an initial compliance test only; and
(2) not be required to conduct testing on an annual or biennial basis.
Nothing in this subsection shall prohibit the department from requesting a compliance test in accordance with 326 IAC 2-1.1-11.

(c) Test notification and reporting shall comply with 326 IAC 3-6.

(d) Following the initial performance or compliance test to demonstrate compliance with the total hydrocarbon emission limits in section 5(d) of this rule, the owner or operator of a secondary lead smelter shall conduct performance tests for total hydrocarbons emissions in accordance with the following schedule:
(1) Conduct an annual performance test for total hydrocarbon emissions from each process vent that has established limits for total hydrocarbons, no later than twelve (12) calendar months following the previous compliance test, unless the owner or operator of a secondary lead smelter installs and operates a CEMS meeting the requirements of 40 CFR 63.8*.
(2) If an annual compliance test demonstrates that a process vent emitted total hydrocarbons at less than fifty percent (50%) of the allowable limit during the time of the annual compliance test, the owner or operator of a secondary lead smelter may submit a written request to U.S. EPA applying for an extension of up to twenty-four (24) calendar months from the previous compliance test to conduct the next compliance test for total hydrocarbons.

(e) Following the initial performance or compliance test to demonstrate compliance with the dioxin and furan emission limits specified in section 5(d) of this rule, the owner or operator of a secondary lead smelter shall conduct a performance test for dioxin and furan emissions from each process vent that has established limits for dioxins and furans at least once every six (6) years following the previous compliance test.

(f) The owner or operator of a secondary lead smelter shall conduct the performance tests specified in subsections (a), (d), and (e) under maximum representative operating conditions for the process. During the performance test, the owner or operator of a secondary lead smelter may operate the control device at maximum or minimum representative operating conditions for monitored control device parameters, whichever results in a lower emission reduction. Upon request, the owner or operator of a secondary lead smelter shall make available to the department any records necessary to determine the conditions of performance tests.

*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-12)


326 IAC 20-13.1-13 Compliance testing methods

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 13. (a) The owner or operator of a secondary lead smelter shall use the following test methods to determine compliance with the emission standards for lead compounds:
(1) 40 CFR 60, Appendix A-1, Method 1* to select the sampling port location and the number of traverse points.
(2) 40 CFR 60, Appendix A-1, Method 2* or at 40 CFR 60, Appendix A-3, Method 5D, Section 8.3* for positive pressure fabric filters, to measure volumetric flow rate.
(3) 40 CFR 60, Appendix A-2, Method 3*, 40 CFR 60, Appendix A-2, Method 3A*, or 40 CFR 60, Appendix A-2, Method 3B* to determine the dry molecular weight of the stack gas.
(4) 40 CFR 60, Appendix A-3, Method 4* to determine moisture content of the stack gas.
(5) 40 CFR 60, Appendix A-8, Method 12* or 40 CFR 60, Appendix A-8, Method 29* to determine compliance with the lead compound emission standards. The minimum sample volume must be two (2.0) dry standard cubic meters (seventy (70) dry standard cubic feet) for each run. The owner or operator of a secondary lead smelter shall perform three (3) test runs and determine compliance using the average of the three (3) runs.

(b) The owner or operator of a secondary lead smelter shall use the following test methods to determine compliance with the emission standards for total hydrocarbons:
(1) 40 CFR 60, Appendix A-1, Method 1* to select the sampling port location and number of traverse points.
(2) The Single Point Integrated Sampling and Analytical Procedure in 40 CFR 60, Appendix A, Method 3B* to measure the carbon dioxide content of the stack gases when using either 40 CFR 60, Appendix A-2, Method 3A* or 40 CFR 60, Appendix A-2, Method 3B*.
(3) 40 CFR 60, Appendix A-3, Method 4* to measure moisture content of the stack gases.
(4) 40 CFR 60, Appendix A-7, Method 25A* to measure total hydrocarbon emissions. The minimum sampling time must be one (1) hour for each run. The owner or operator of a secondary lead smelter shall perform a minimum of three (3) test runs. The owner or operator of a secondary lead smelter shall calculate a one (1) hour average total hydrocarbons concentration for each run and use the average of the three (3) one (1) hour averages to determine compliance.

(c) The owner or operator of a secondary lead smelter shall correct the measured total hydrocarbon concentrations to four percent (4%) carbon dioxide, specified as follows:
(1) If the measured percent carbon dioxide is greater than four-tenths of one percent (0.4%) in each compliance test, the owner or operator of a secondary lead smelter shall determine the correction factor using the following equation:
326110774SNA03.jpg
Where:  F  =  Correction factor (no units). 
  CO2  =  Percent carbon dioxide measured using 40 CFR 60, Appendix A-2, Method 3A* or 40 CFR 60, Appendix A-2, Method 3B*, where the measured carbon dioxide is greater than four-tenths of one percent (0.4%). 
(2) If the measured percent carbon dioxide is equal to or less than four-tenths of one percent (0.4%), the owner or operator of a secondary lead smelter shall use a correction factor (F) of ten (10).
(3) The owner or operator of a secondary lead smelter shall determine the corrected total hydrocarbons concentration by multiplying the measured total hydrocarbons concentration by the correction factor (F) determined for each compliance test.

(d) The owner or operator of a secondary lead smelter shall use the following test methods to determine compliance with the emission standards for dioxins and furans:
(1) 40 CFR 60, Appendix A-1, Method 1* to select the sampling port location and the number of traverse points.
(2) 40 CFR 60, Appendix A-1, Method 2* or 40 CFR 60, Appendix A-3, Method 5D, Section 8.3* for positive pressure fabric filters to measure volumetric flow rate.
(3) 40 CFR 60, Appendix A-2, Method 3A* or 40 CFR 60, Appendix A-2, Method 3B* to determine the oxygen and carbon dioxide concentrations of the stack gas.
(4) 40 CFR 60, Appendix A-3, Method 4* to determine moisture content of the stack gas.
(5) 40 CFR 60, Appendix A-7, Method 23* to determine the dioxins and furans concentration.

(e) The owner or operator of a secondary lead smelter shall determine the dioxins and furans toxic equivalency through the following procedures:
(1) Measure the concentration of each dioxins and furans congener shown in the following table using 40 CFR 60, Appendix A-7, Method 23*:
Dioxin/furan congener  Toxic equivalency factor (TEQ) 
2,3,7,8-tetrachlorinated dibenzo-p-dioxin  1 
1,2,3,7,8-pentachlorinated dibenzo-p-dioxin  0.5 
1,2,3,4,7,8-hexachlorinated dibenzo-p-dioxin  0.1 
1,2,3,7,8,9-hexachlorinated dibenzo-p-dioxin  0.1 
1,2,3,6,7,8-hexachlorinated dibenzo-p-dioxin   0.1 
1,2,3,4,6,7,8-heptachlorinated dibenzo-p-dioxin   0.01 
Octachlorinated dibenzo-p-dioxin  0.001 
2,3,7,8-tetrachlorinated dibenzofuran  0.1 
2,3,4,7,8-pentachlorinated dibenzofuran  0.05 
1,2,3,7,8-pentachlorinated dibenzofuran  0.5 
1,2,3,4,7,8-hexachlorinated dibenzofuran  0.1 
1,2,3,6,7,8-hexachlorinated dibenzofuran  0.1 
1,2,3,7,8,9-hexachlorinated dibenzofuran  0.1 
(2) The owner or operator of a secondary lead smelter shall correct the concentration of dioxins and furans in terms of toxic equivalency to seven percent (7%) oxygen using the following equation:
326110774SNA04.jpg
Where:  Cadj  =  Dioxins and furans concentration adjusted to seven percent (7%) oxygen. 
  Cmeas  =  Dioxins and furans concentration measured in nanograms per dry standard cubic meter. 
  (20.9-7)  =  Twenty and nine-tenths percent (20.9%) oxygen minus seven percent (7%) oxygen (defined oxygen correction basis). 
  20.9  =  Percent of oxygen concentration in air. 
  %O2  =  Percent of oxygen concentration measured on a dry basis. 
(3) For each dioxins and furans congener measured as specified in subdivisions (1) and (2), multiply the congener concentration by its corresponding toxic equivalency factor.
(4) Sum the values calculated as specified in subdivision (3) to obtain the total concentration of dioxins and furans emitted in terms of toxic equivalency.

*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-13)


326 IAC 20-13.1-14 Notification requirements

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 14. (a) The owner or operator of a secondary lead smelter shall comply with all of the notification requirements of 40 CFR 63.9*.

(b) The owner or operator of a secondary lead smelter shall submit the fugitive dust control standard operating procedures manual required under section 9 of this rule and the standard operating procedures manual for baghouses required under section 10 of this rule to the department along with a notification that the smelter is seeking review and approval of these plans and procedures. The owner or operator of a secondary lead smelter shall submit this notification no later than January 7, 2013.

(c) For the owner or operator of a secondary lead smelter that commences construction or reconstruction after January 5, 2012, the owner or operator of a secondary lead smelter shall submit this notification no later than one hundred eighty (180) days before startup of the constructed or reconstructed secondary lead smelter, but no sooner than January 5, 2012.

(d) For an affected source that has received a construction permit from the department on or before January 5, 2012, the owner or operator of a secondary lead smelter shall submit this notification no later than January 7, 2013.

*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-14)


326 IAC 20-13.1-15 Record keeping and reporting requirements

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 15. (a) The owner or operator of a secondary lead smelter shall comply with all of the record keeping and reporting requirements specified in 40 CFR 63.10* that are referenced in section 1(c) of this rule. Records shall be:
(1) maintained in a form suitable and readily available for expeditious review, in accordance with 40 CFR 63.10(b)(1)*; and
(2) kept on site for at least two (2) years after the date of occurrence, measurement, maintenance, corrective action, report, or record, in accordance with 40 CFR 63.10(b)(1)*.

(b) The standard operating procedure manuals required in sections 9 and 10 of this rule must be submitted to the department in electronic format for review and approval of the initial submittal and whenever an update is made to the procedures.

(c) The owner or operator of a secondary lead smelter shall maintain for a period of five (5) years the following records:
(1) Electronic records of the bag leak detection system output.
(2) An identification of the date and time of any bag leak detection system alarms.
(3) The time that procedures were initiated to determine the cause of any bag leak detection system alarm.
(4) The cause of any bag leak detection system alarm.
(5) An explanation of the corrective actions taken in response to any bag leak detection system alarms.
(6) The date and time the cause of any bag leak detection system alarms was corrected.
(7) All records of inspections and maintenance activities required in section 10(e) of this rule as part of the practices described in the standard operating procedures manual for baghouses required under section 10(c) of this rule.
(8) Electronic records of the pressure drop and water flow rate values for wet scrubbers used to control metal hazardous air pollutant emissions from process fugitive sources as required in section 11(e) of this rule.
(9) Electronic records of the output from the continuous temperature monitor required in section 11(f) of this rule, an identification of periods when the three (3) hour average temperature fell below the minimum temperature established under section 11(f)(4) of this rule, and an explanation of the corrective action taken.
(10) Electronic records of the continuous pressure monitors for total enclosures required in section 8 of this rule, and an identification of periods when the pressure was not maintained as required in section 7(c)(4) of this rule.
(11) Records of any time periods power was lost to the continuous pressure monitors for total enclosures required in section 8 of this rule and records of loss of power to the air handling system maintaining negative pressure on total enclosures.
(12) Records of the inspections of facility enclosures required in section 7(c)(6) of this rule.
(13) Records of all cleaning and inspections required as part of the practices described in the standard operating procedures manual required under section 9 of this rule.
(14) Electronic records of the output of any CEMS installed to monitor lead emissions meeting the requirements in section 11(h) of this rule.
(15) Records of the occurrence and duration of each malfunction of operation or process equipment or the air pollution control equipment and monitoring equipment.
(16) Records of actions taken during periods of malfunction to minimize emissions in accordance with section 5(h) of this rule, including corrective actions to restore malfunctioning process and air pollution control and monitoring equipment to its normal or usual manner of operation.
(17) Records of any periods of startup or shutdown of a furnace and actions taken to minimize emissions during that period in accordance with section 5(i) of this rule.

(d) The owner or operator of a secondary lead smelter shall comply with all of the reporting requirements specified in 40 CFR 63.10* that are referenced in section 1(c) of this rule.
(1) The owner or operator of a secondary lead smelter shall submit reports no less frequently than specified under 40 CFR 63.10(e)(3)*.
(2) Once a violation of the standard or excess emissions is reported, the owner or operator of a secondary lead smelter must follow the reporting format required under 40 CFR 63.10(e)(3)* until a request to reduce reporting frequency is approved by the department.

(e) In addition to the information required under the applicable sections of 40 CFR 63.10* that are referenced in section 1(c) of this rule, the owner or operator of a secondary lead smelter shall include the following information in the reports required under subsection (d):
(1) Records of the concentration of lead in each process vent, and records of the rolling twelve (12) month flow-weighted average concentration of lead compounds in vent gases calculated monthly as required in section 5(b) of this rule, except during the first year when the concentration is calculated using the method described in section 5(b)(3) of this rule.
(2) Records of the concentration of total hydrocarbon and dioxins and furans in each process vent that has established limits for total hydrocarbon and dioxins and furans as required in section 5(d) of this rule.
(3) Records of all periods when monitoring using a CEMS for lead or total hydrocarbon was not in compliance with applicable limits.
(4) Records of all alarms from the bag leak detection system specified in section 10 of this rule.
(5) A description of the procedures taken following each bag leak detection system alarm in accordance with section 10(a)(2) and 10(a)(3) of this rule.
(6) A summary of the records maintained as part of the practices described in the standard operating procedures manual for baghouses required under section 10 of this rule, including an explanation of the periods when the procedures were not followed and the corrective actions taken.
(7) An identification of the periods when the pressure drop and water flow rate of wet scrubbers used to control process fugitive sources dropped below the levels established in section 9 of this rule, and an explanation of the corrective actions taken.
(8) Records of the temperature monitor output, in three (3) hour block averages, for those periods when the temperature monitored in accordance with section 11(f) of this rule fell below the level established in section 11(f)(4) of this rule.
(9) Certification that the plastic separation process for battery breakers required in section 5(j) of this rule was operated at all times the battery breaker was in service.
(10) Records of periods when the pressure was not maintained as required in section 7(c)(4) of this rule or power was lost to the continuous pressure monitoring system as required in section 8 of this rule.
(11) If a malfunction occurred during the reporting period, the report must include the number, duration, and a brief description for each type of malfunction that occurred during the reporting period and caused or may have caused any applicable emissions limitation to be exceeded. The report must also include a description of actions taken during a malfunction of an affected source to minimize emissions in accordance with section 5(h) of this rule, including actions taken to correct a malfunction.
(12) A summary of the fugitive dust control measures performed during the required reporting period, including an explanation of the periods when the procedures outlined in the standard operating procedures manual in accordance with section 9 of this rule were not followed and the corrective actions taken. The reports must not contain copies of the daily records required to demonstrate compliance with the requirements of the standard operating procedures manuals required under section 9 of this rule.
(13) Records of any periods of startup or shutdown of a furnace including an explanation of the periods when the procedures required in section 5(i) of this rule were not followed and the corrective actions taken.
(14) The owner or operator of a secondary lead smelter shall submit records as follows:
(A) As of January 1, 2012, and within sixty (60) days after the date of completing each performance test, as defined in 40 CFR 63.2* and as required in this rule, the owner or operator of a secondary lead smelter shall submit performance test data, except opacity data, electronically to U.S. EPA's Central Data Exchange by using the Electronic Reporting Tool. Only data collected using test methods compatible with the Electronic Reporting Tool are subject to this requirement to be submitted electronically into U.S. EPA's WebFIRE database.
(B) Within sixty (60) days after the date of completing each CEMS performance evaluation test, as defined in 40 CFR 63.2* and required by this rule, the owner or operator a secondary lead smelter shall submit the relative accuracy test audit data electronically in to U.S. EPA's Central Data Exchange by using the Electronic Reporting Tool as mentioned in clause (A). Only data collected using test methods compatible with the Electronic Reporting Tool are subject to this requirement to be submitted electronically into U.S. EPA's WebFIRE database.
(C) All reports required by this rule not subject to the requirements in clauses (A) and (B) must be sent to U.S. EPA at the appropriate address listed in 40 CFR 63.13*. U.S. EPA or the department may request a report in any form suitable for the specific case. U.S. EPA retains the right to require submittal of reports subject to clauses (A) and (B) in paper format.

*These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-15)


326 IAC 20-13.1-16 Affirmative defense to civil penalties for exceedance of emissions limit during malfunction

Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17


Sec. 16. (a) In response to an action to enforce the standards set forth in this rule, the owner or operator of a secondary lead smelter may assert an affirmative defense to a claim for civil penalties for exceedances of the standards that are caused by malfunction, as defined at 40 CFR 63.2*. Appropriate penalties may be assessed if the owner or operator of a secondary lead smelter fails to meet its burden of proving all of the requirements in the affirmative defense. The affirmative defense shall not be available for claims for injunctive relief.

(b) To establish the affirmative defense in any action to enforce the standards set forth in this rule, the owner or operator of a secondary lead smelter must timely meet the notification requirements of subsection (c), and shall prove by a preponderance of evidence the following:
(1) The excess emissions:
(A) were caused by a sudden, infrequent, and unavoidable failure of air pollution control and monitoring equipment, process equipment, or a process to operate in a normal or usual manner;
(B) could not have been prevented through careful planning, proper design or better operation and maintenance practices;
(C) did not stem from any activity or event that could have been foreseen and avoided, or planned for; and
(D) were not part of a recurring pattern indicative of inadequate design, operation, or maintenance.
(2) Repairs were made as expeditiously as possible when the applicable emission limitations were being exceeded. Off-shift and overtime labor were used, to the extent practicable to make these repairs.
(3) The frequency, amount, and duration of the excess emissions, including any bypass, were minimized to the maximum extent practicable during periods of the emissions.
(4) If the excess emissions resulted from a bypass of control equipment or a process, then the bypass was unavoidable to prevent loss of life, personal injury, or severe property damage.
(5) All possible steps were taken to minimize the impact of the excess emissions on ambient air quality, the environment, and human health.
(6) All emissions monitoring and control systems were kept in operation if at all possible, consistent with safety and good air pollution control practices.
(7) All of the actions in response to the excess emissions were documented by properly signed, contemporaneous operating logs.
(8) At all times, the affected emission unit was operated in a manner consistent with good practices for minimizing emissions.
(9) A written root cause analysis has been prepared, the purpose of which is to determine, correct, and eliminate the primary causes of the malfunction and the excess emissions resulting from the malfunction event at issue. The analysis shall also specify, using best monitoring methods and engineering judgment, the amount of excess emissions that were the result of the malfunction.

(c) The owner or operator of the affected emission unit experiencing an exceedance of its emissions limit during a malfunction shall notify the department by telephone or facsimile transmission as soon as possible, but no later than two (2) business days after the initial occurrence of the malfunction, that it wishes to avail itself of an affirmative defense to civil penalties for that malfunction. The owner or operator of a secondary lead smelter seeking to assert an affirmative defense shall also submit a written report to the department within forty-five (45) days of the initial occurrence of the exceedance of the standard in this rule to demonstrate, with all necessary supporting documentation, that it has met the requirements set forth in subsection (b). The owner or operator of a secondary lead smelter may seek an extension of this deadline for up to thirty (30) additional days by submitting a written request to the department before the expiration of the forty-five (45) day period. Until a request for an extension has been approved by the department, the owner or operator of a secondary lead smelter is subject to the requirement to submit the report within forty-five (45) days of the initial occurrence of the exceedance.

*This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
(Air Pollution Control Board; 326 IAC 20-13.1-16)


SECTION 97. 326 IAC 20-13 IS REPEALED.

SECTION 98. SECTION 97 of this document takes effect January 6, 2014.


Posted: 06/13/2012 by Legislative Services Agency

DIN: 20120613-IR-326110774SNA
Composed: Jul 30,2014 1:16:12PM EDT
A PDF version of this document.