Note: This message is displayed if (1) your browser is not standards-compliant or (2) you have you disabled CSS. Read our Policies for more information.

INDOT: Indiana Test Methods or Procedures Index

Indiana Department of Transportation

INDOT > Doing Business with INDOT > Contractors/Construction > Materials Management Information > Indiana Test Methods ...Indiana Test Methods or Procedures Index

Documents on this page will be opened as a PDF file or be downloaded to your computer depending on your personal settings.

Indiana Test Methods Or Procedures Index
ITM No.	Effective Date	Contact Person	Title
Policy	03/19/10	R. Walker	Indiana test method or procedure committee
ITM 202	01/01/08	T. Tracy	Acid insoluble content of fine aggregate
ITM 203	11/01/12	R. Rees	Control procedures for classification of aggregates
ITM 205	01/01/08	R. Rees	Acceptance procedures for dolomite aggregates
ITM 206	01/01/08	R. Rees	Scratch hardness of coarse aggregate particles
ITM 207	01/01/08	R. Rees	Sampling stockpiled aggregates
ITM 208	01/01/08	M. Zaheer	Permeability of aggregates
ITM 209	01/01/08	R. Rees	Soundness of aggregates by freezing and thawing in a brine solution
ITM 210	01/01/08	R. Rees	Class AP coarse aggregate
ITM 211	04/17/13	R. Rees	Certified aggregate producer program
ITM 212	01/01/08	T. Tracy	Acceptance procedure of air cooled blast furnace slag for leachated determination
ITM 214	11/19/10	R. Rees	Acceptance procedures for polish resistant aggregates
ITM 215	01/01/08	N. Siddiki	Recycled foundry sand toxicity test
ITM 216	04/04/08	A. Zander	Lightweight dynamic cone penetrometer testing of flowable backfill
ITM 217	04/04/08	A. Zander	Dry flow testing of flowable backfill
ITM 218	04/04/08	A. Zander	Dry unit weight for flowable backfill
ITM 219	11/14/08	A. Zander	Acceptance procedures for steelslag for deleterious materials
ITM 220	11/09/10	M. Beeson	Class AS aggregate for use in SMA mixture
ITM 221	11/01/12	M. Beeson	HMA Surface Mixture Coarse Aggregate for Seal ≥ 10,000,00
ITM 301	04/12/12	K. Anderson	Reinforcing bar and dowel bar certification program
ITM 401	01/01/08	A. Zander	High pressure air content of hardened portland cement concrete
ITM 402	01/01/08	A. Zander	Strength of portland cement concrete pavement (pccp) using the maturity method
ITM 403	01/01/08	A. Zander	Water-cementitious ratio
ITM 404	01/01/08	A. Zander	PCCP core length determination
ITM 405	04/06/10	A. Zander	Portland cement concrete plant inspection
ITM 406	07/11/08	A. Zander	Certified ready mixed concrete plant program
ITM 505	01/01/08	M. Zaheer	Five-cycle slake resistance test on shale
ITM 506	04/17/13	R. Walker	Field determination of moisture content of soil
ITM 507	04/17/13	N. Siddiki	Calcium carbonate content in soils using sequential loss on ignition test
ITM 508	11/01/12	N. Siddiki	Field determination of deflection using light weight deflectometer
ITM 509	04/17/13	N. Siddiki	Field determination of Strength Using Dynamic Cone Penetrometer
ITM 510	04/17/13	N. Siddiki	Determining Sulfate Content in Soils by Colorimetric Method
ITM 511	04/17/13	N. Siddiki	Jar Slake Test
ITM 512	04/17/13	N. Siddiki	Field Determination of Maximum Dry Density and Optimum Moisture Content of Soil
ITM 571	01/01/08	M. Beeson	Quantative extraction of asphalt/binder and gradation of extracted aggregate from HMA mixtures
ITM 572	11/03/11	M. Beeson	Drying HMA mixtures
ITM 576	11/14/08	H. Phillips	Laboratory evaluation of anti-adhesive agents
ITM 579	01/01/08	M. Beeson	Quantity determination of asphalt materials and aggregates for seal coats
ITM 580	11/09/10	M. Beeson	Sampling HMA
ITM 581	04/12/12	M. Beeson	Performance graded binder approved supplier certification program
ITM 583	11/01/12	M. Beeson	Certified hot mix asphalt producer program
ITM 584	09/01/11	M. Beeson	Bulk specific gravity of aggregate blends with rap
ITM 586	04/18/11	M. Beeson	Asphalt content by ignition
ITM 587	04/04/08	M. Beeson	Reducing HMA samples to testing size
ITM 588	04/04/08	M. Beeson	Percent Within Limits (PWL)
ITM 589	04/17/13	M. Beeson	Asphalt Binder Film Thickness
ITM 602	01/01/08	T. Tracy	Mercaptans (water insoluble) by iodimetric titration - deadstop
ITM 604	01/01/08	T. Tracy	Flexibility of epoxy penetrating sealers
ITM 605	01/01/08	T. Tracy	Moisture permeability of epoxy sealer films
ITM 606	11/14/08	T. Tracy	Approval procedures for coating formulations and coating systems
ITM 801	01/01/08	M. Beeson	Determining asphalt content of preformed expansion joint fillers for concrete paving and structural construction
ITM 802	04/12/12	R. Walker	Random sampling
ITM 803	04/17/13	R. Walker	Contractor quality control plans
ITM 804	04/17/13	R. Walker	Sample material certification forms
ITM 806	02/18/13	R. Walker	Approved list requirements
ITM 807	01/01/08	A. Zander	Laboratory testing of chemical anchor systems
ITM 808	01/01/08	A. Zander	Laboratory testing of PCC sealer/healers
ITM 810	11/06/09	R. Rees	Sampling deicing material
ITM 811	01/01/08	T. Tracy	Sampling bulk containers of glass beads
ITM 812	01/01/08	M. Prather	Macrotexture of milled pavement
ITM 813	04/12/12	A. Zander	Certified precast concrete producer program
ITM 814	07/11/08	A. Zander	Certified precast prestressed concrete producer program
ITM 902	03/06/09	M. Doherty	Verifying sieves
ITM 903	04/06/10	M. Doherty	Verifying ovens
ITM 905	11/09/10	M. Doherty	Verifying vacuum systems
ITM 906	01/01/08	M. Doherty	Verifying mechanical shakers
ITM 908	01/01/08	M. Doherty	Verifying calibration settings for superpave gyratory compactors
ITM 909	04/04/08	M. Doherty	Verifying thermometers
ITM 910	04/06/10	M. Doherty	Verifying balances
ITM 911	01/01/08	A. Zander	Verifying slump cones
ITM 912	11/06/09	K. Anderson	Profilographs
ITM 914	04/17/13	N. Siddiki	Verifying Soils Test Molds
ITM 915	04/17/13	N. Siddiki	Verifying Soils Compaction Rammers
ITM 927	11/01/12	T. Nahrwold	Procedure for roadway field evaluation and approval list requirements for temporary pavement marking tape, type 1
ITM 930	01/01/08	T. Nahrwold	Procedure for outdoor weathering evaluation and approval list requirements for reflective sheeting materials
ITM 931	11/23/11	T. Nahrwold	Measurement of retroreflective pavement marking materials
ITM 932	01/01/08	P. Goodwin	Procedure for bench testing, field testing, and approval list requirements for traffic controller cabinet components
ITM 933	01/01/08	P. Goodwin	Procedure for bench testing, field testing, and approval list requirements for 12 inch light emitting diode (LED) traffic signal modules
ITM 934	01/01/08	P. Goodwin	Procedure for evaluating vehicle detection performance
ITM 935	01/01/08	P. Goodwin	Procedure for bench testing, field testing, and approval list requirements for external time clocks
ITM 936	01/01/08	P. Goodwin	Procedure for bench testing, field testing, and approval list requirements for video vehicle detectors
ITM 945	01/01/08	T. Nahrwold	Procedure for roadway field evaluation and approval list requirements for durable preformed pavement marking tape
ITM 947	01/01/08	P. Goodwin	Procedure for bench testing, field evaluation, and approval list requirements for spread spectrum radio modems
ITM 948	07/09/10	P. Goodwin	Procedure for bench testing, field testing and approval list requirements for 5 ghz unlicensed frequency band radios
ITM 949	07/09/10	P. Goodwin	Procedure for bench testing, field testing and approval list requirements for its AFP controllers
ITM 950	07/09/10	P. Goodwin	Procedure for bench testing, field testing and approval list requirements for its Ethernet switches
ITM 951	11/09/10	K. Veygman	Procedure for bench testing, field testing, and approval list requirements for high speed camera dome with pan. tilt 200m
ITM 952	11/09/10	K. Veygman	Procedure for bench testing, field testing, and approval list requirements for camera interface rack mount
ITM 953	11/09/10	K. Veygman	Procedure for bench testing, field testing, and approval list requirements for microwave vehicle radar
ITM 954	11/09/10	D. Boruff	Procedure for bench testing, field testing and approval list requirements for wireless vehicle detection system