IN.gov - Skip Navigation

Note: This message is displayed if (1) your browser is not standards-compliant or (2) you have you disabled CSS. Read our Policies for more information.

CTAP > Fiber Reinforced Plastic Manufacturing > Indiana's Rule for the Reinforced Plastic Composites Fabricating and Boat Manufacturing Industries Indiana's Rule for the Reinforced Plastic Composites Fabricating and Boat Manufacturing Industries

Several rules are developed that will affect the Reinforced Plastic Composites Fabricating and Boat Manufacturing industries. The information provided below is regarding the Indiana state rules to control styrene emissions. If you need more information on the federal rule for these two industries, please refer to U.S. EPA's Web site.

  • Boat Manufacturing: 326 IAC 20-48 applies in place of 326 IAC 20-25 after August 23, 2004.
  • Fiberglass Reinforced Plastic: 326 IAC 20-56 applies in place of 326 IAC 20-25 after April 21, 2006 for a major source that existed before August 2, 2001.